[Xorp-cvs] SF.net SVN: xorp:[11633] trunk/xorp/libxipc
bms_fbsd at users.sourceforge.net
bms_fbsd at users.sourceforge.net
Sat Nov 28 19:12:06 PST 2009
Revision: 11633
http://xorp.svn.sourceforge.net/xorp/?rev=11633&view=rev
Author: bms_fbsd
Date: 2009-11-29 03:12:06 +0000 (Sun, 29 Nov 2009)
Log Message:
-----------
Complete the move.
Removed Paths:
-------------
trunk/xorp/libxipc/bench_ipc.awk
trunk/xorp/libxipc/bench_ipc.sh
trunk/xorp/libxipc/bench_ipc_gnuplot.sh
Deleted: trunk/xorp/libxipc/bench_ipc.awk
===================================================================
--- trunk/xorp/libxipc/bench_ipc.awk 2009-11-29 03:10:37 UTC (rev 11632)
+++ trunk/xorp/libxipc/bench_ipc.awk 2009-11-29 03:12:06 UTC (rev 11633)
@@ -1,52 +0,0 @@
-#
-# $XORP$
-#
-
-#
-# An AWK script to process and print statistics of data collected
-# by script bench_ipc.sh
-#
-
-/^XrlAtoms/ {
- if (n > 0)
- dump_stats();
-
- t = 0; # total
- tsq = 0; # total of squares
- n = 0; # number of readings
- min = 10000000;
- max = 0;
- n_xrl = $5;
-}
-
-/^Received/ {
- x = $10;
- t = t + x;
- tsq = tsq + x * x;
- n++;
- if (x > max)
- max = x;
- if (x < min)
- min = x;
-}
-
-BEGIN {
- print "# Column 0 XrlAtoms per Xrl";
- print "# Column 1 Mean XRLs per sec";
- print "# Column 2 Std dev of XRLs per sec";
- print "# Column 3 Min XRLs per sec";
- print "# Column 4 Max XRLs per sec";
-}
-
-END {
- dump_stats()
-}
-
-function dump_stats() {
- m = t / n;
- msq = tsq / n;
-
- sigma = (msq - m * m) ** 0.5;
-
- print n_xrl, m, sigma, min, max;
-}
Deleted: trunk/xorp/libxipc/bench_ipc.sh
===================================================================
--- trunk/xorp/libxipc/bench_ipc.sh 2009-11-29 03:10:37 UTC (rev 11632)
+++ trunk/xorp/libxipc/bench_ipc.sh 2009-11-29 03:12:06 UTC (rev 11633)
@@ -1,46 +0,0 @@
-#!/usr/local/bin/bash
-
-#
-# $XORP$
-#
-
-#
-# A script to perform IPC performance measurements
-#
-
-# Conditionally set ${srcdir} if it wasn't assigned (e.g., by `gmake check`)
-if [ "X${srcdir}" = "X" ] ; then srcdir=`dirname $0` ; fi
-
-BINDIR=.
-
-${BINDIR}/xorp_finder &
-FINDER_PID=$!
-
-test_pf()
-{
- local pfname=$1
- local pfenv=$2
- local pfcmd=$3
- local rawfile=${pfname}.log
- local i
-
- echo "-------------------------------------"
- echo "Collecting measurements for ${pfname}"
- echo "-------------------------------------"
-
- for i in 0 1 2 3 4 5 6 7 8 9 10 12 15 18 20 25; do
- XORP_PF=${pfenv} ${BINDIR}/test_xrl_sender ${pfcmd} -n $i
- done | tee ${rawfile}
- outfile=${pfname}.dat
- cat ${rawfile} | awk -f ${srcdir}/bench_ipc.awk > $outfile
-
- echo "Output:"
- echo " Raw data file = ${rawfile}"
- echo " Processed data file = ${outfile}"
-}
-
-test_pf "inproc" "i" "-m 0 -r"
-test_pf "udp" "u" "-m 0 -r"
-test_pf "tcp" "t" "-m 0 -r"
-
-kill ${FINDER_PID}
Deleted: trunk/xorp/libxipc/bench_ipc_gnuplot.sh
===================================================================
--- trunk/xorp/libxipc/bench_ipc_gnuplot.sh 2009-11-29 03:10:37 UTC (rev 11632)
+++ trunk/xorp/libxipc/bench_ipc_gnuplot.sh 2009-11-29 03:12:06 UTC (rev 11633)
@@ -1,97 +0,0 @@
-#!/bin/sh
-
-#
-# $XORP$
-#
-
-#
-# A script to plot the IPC performance measurements results.
-#
-
-# Terminal and label fonts
-SET_TERM="set term post eps \"Times-Roman\" 23"
-FONT="Times-Roman, 23"
-SET_POINTSIZE="set pointsize 1.8"
-
-# Default setup
-XLABEL=""
-YlABEL=""
-SET_KEY="set key top right"
-
-
-post_process_eps() {
-# sed 's/BoundingBox: 50 50 410 302/BoundingBox: 60 60 315 290/g' $OFILE >$OFILE.tmp
-# mv $OFILE.tmp $OFILE
-}
-
-# Plot functions
-plot_eps() {
-gnuplot <<EOF
-$SET_TERM
-$SET_POINTSIZE
-set xlabel "$XLABEL" "$FONT"
-set ylabel "$YLABEL" "$FONT"
-set title "$TITLE" "$FONT"
-set xrange $XRANGE
-set yrange $YRANGE
-$SET_KEY
-set output "$OFILE"
-set nologscale xy
-set $LOGSCALE
-$PLOT
-EOF
-post_process_eps
-}
-
-
-# Filter input
-filter_input() {
-awk '{if ($1 == "#") { print $0 } else { print $1" "$2" "$3} }' $1 > $2
-}
-
-# Setup various parameters
-setup_vars() {
-
-filter_input $stat1.dat $stat1.dat.gnuplot
-filter_input $stat2.dat $stat2.dat.gnuplot
-filter_input $stat3.dat $stat3.dat.gnuplot
-
-IFILE1="$stat1.dat.gnuplot"
-IFILE2="$stat2.dat.gnuplot"
-IFILE3="$stat3.dat.gnuplot"
-
-# Parameters
-PAR_AVE1="using 1:2 t \"$NAME1\" w lp lt 1 lw 2 pt 2"
-PAR_BAR1="t \"\" w yerrorbars lt 1 lw 2 pt 2"
-PAR_AVE2="using 1:2 t \"$NAME2\" w lp lt 1 lw 2 pt 4"
-PAR_BAR2="t \"\" w yerrorbars lt 1 lw 2 pt 4"
-PAR_AVE3="using 1:2 t \"$NAME3\" w lp lt 1 lw 2 pt 6"
-PAR_BAR3="t \"\" w yerrorbars lt 1 lw 2 pt 6"
-
-}
-
-
-# Common setup
-XLABEL="Number of XRL arguments"
-LOGSCALE="nologscale xy"
-XRANGE="[*:*]"
-YRANGE="[*:*]"
-#SET_KEY="set key top right"
-PLOT="plot \"$IFILE1\" $PAR_AVE1, \"$IFILE1\" $PAR_BAR1, \"$IFILE2\" $PAR_AVE2, \"$IFILE2\" $PAR_BAR2, \"$IFILE3\" $PAR_AVE3, \"$IFILE3\" $PAR_BAR3"
-
-stat1="inproc"
-stat2="tcp"
-stat3="udp"
-NAME1="In-Process"
-NAME2="TCP"
-NAME3="UDP"
-YLABEL="Performance (XRLs/sec)"
-TITLE="XRL performance for various communication families"
-setup_vars
-OFILE="xrl_performance.eps"
-# Select with or without std. deviation
-#PLOT="plot \"$IFILE1\" $PAR_AVE1, \"$IFILE2\" $PAR_AVE2, \"$IFILE3\" $PAR_AVE3"
-PLOT="plot \"$IFILE1\" $PAR_AVE1, \"$IFILE1\" $PAR_BAR1, \"$IFILE2\" $PAR_AVE2, \"$IFILE2\" $PAR_BAR2, \"$IFILE3\" $PAR_AVE3, \"$IFILE3\" $PAR_BAR3"
-plot_eps
-
-exit 0
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
More information about the Xorp-cvs
mailing list