[Xorp-hackers] FW: boot.config problems?

Weaver John-JWEAVER1 John.Weaver@motorola.com
Wed, 14 Sep 2005 10:40:58 -0500


Just tried the non-stripped version and I get the same thing.  I launched it
with the -v and still get nothing to print.  Has any one ever tried this on
the PPC?  I am using gcc 3.3.3, autoconf 2.59, and automake 1.8.3.

John 

-----Original Message-----
From: Kristian Larsson [mailto:kristian@juniks.net] 
Sent: Wednesday, September 14, 2005 12:35 AM
To: Weaver John-JWEAVER1
Cc: xorp-hackers@xorp.org
Subject: Re: [Xorp-hackers] FW: boot.config problems?

Hmm, it's possible I suppose, but I've had no such problems so far...

Have you tried with a non-stripped version?

I think you can tell strip to be more careful when removing stuff, but then
the binaries won't shrink as much...

//Kristian

On Tue, Sep 13, 2005 at 04:55:10PM -0500, Weaver John-JWEAVER1 wrote:
> I wonder if stripping the whole structure has hosed it? 
> 
> -----Original Message-----
> From: Kristian Larsson [mailto:kristian@juniks.net]
> Sent: Tuesday, September 13, 2005 4:29 PM
> To: Weaver John-JWEAVER1
> Subject: Re: [Xorp-hackers] FW: boot.config problems?
> 
> I'm not in front of a xorp router right now so I can't test the config 
> but since Atanu did that I'm sure it's okey.
> 
> xorp_rtrmgr -v -b <config> should work
> 
> But you're saying it's just hanging!? When does this happen? When 
> using -v in conjuction with this configuration file? Just using -v? As 
> long as you are using this config.boot?
> 
> If it's just when using the particular config you should try loading 
> parts of it.
> 
>     Kristian
> 
> On Tue, Sep 13, 2005 at 04:10:56PM -0500, Weaver John-JWEAVER1 wrote:
> > Someone else changed the name of it and moved it.  I am pretty sure 
> > it was modified from the original config.boot.  I ripped out all the 
> > irrelevant stuff for simplicity.  I used the -b command to specify 
> > this file so hopefully it was picking this one up?  When I boot with 
> > the -v, can I use -vb or -v -b?
> > 
> > John
> > 
> > -----Original Message-----
> > From: Kristian Larsson [mailto:kristian@juniks.net]
> > Sent: Tuesday, September 13, 2005 4:07 PM
> > To: Weaver John-JWEAVER1
> > Cc: xorp-hackers@xorp.org
> > Subject: Re: [Xorp-hackers] FW: boot.config problems?
> > 
> > You're config file is not named boot.config but rather config.boot 
> > and placed in /usr/local/xorp/config.boot, right?
> > 
> > Try starting up with -v, you should get some error message.
> > 
> > Have you actually used this configuration or is it written by hand?
> > It doesn't contain a xorp header which makes me wonder...
> > You could start xorp and then add little chunks of the config and 
> > the commiting to make sure the whole conf is alright.
> > 
> > Regards,
> > Kristian
> > 
> > On Tue, Sep 13, 2005 at 03:46:55PM -0500, Weaver John-JWEAVER1 wrote:
> > > I am having problems getting XORP starting up.  I think it may be 
> > > my boot.config?  I have 2 interfaces (eth1 and eth2) and am only 
> > > running PIM and IGMP on those interfaces.  I am trying to use the 
> > > default system
> > config.
> > > Is there any debug I can turn on when I try and launch the xorp_rtmgr?

> > > Can anyone take a look at this file and let me know if I messed it up?

> > > The system I am running it on is kind of like a Power Mac.  It is 
> > > running Yellow Dog on a PPC 750.  Everything built fine and the 
> > > make test passed except for rip as you may remember.
> > >  
> > > Thanks,
> > > John
> >