[Xorp-hackers] OSPFv2 Peering stays in INIT State on Cisco
"Patrick Preuß"
deathdealer@gmx.net
Fri, 16 Sep 2005 12:27:41 +0200 (MEST)
Hello
i have testet the OSPF Code on a Linux Machine over a GRE Interface to a
Cisco 7507 and see that the Session stays in the INIT/- State on the Cisco.
The XORP tells me the Packet size is not Correct.
i have used two different configurations, one you will find attached is w/o
setting p2p mode, the other is with p2p and both report the same.
i have used quaggar also and there is no problem. i can provide more
information if needed.
XORP Router:
Distribution: Fedora Core 3
Kernel: 2.6.12-1.1376_FC3
Networking: gre or eth
Cisco Router:
Cisco 7507
IOS: RSP Software (RSP-JK9SV-M), Version 12.3(13)
The Tunnel is configured from the OS.
Please have a look at Bug 216
http://www.xorp.org/bugzilla/show_bug.cgi?id=216
--
best regards
Patrick Marc Preuss
----------------------------------------------------------------------
--
"...a hundred billion castaways looking for a home."
- Sting "Message in a
Bottle" (1979)
Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko!
Satte Provisionen für GMX Partner: http://www.gmx.net/de/go/partner