[Xorp-hackers] (no subject)

Pavlin Radoslavov pavlin at icir.org
Tue Oct 23 02:08:09 PDT 2007


arjun at ceeyes.com <arjun at ceeyes.com> wrote:

> 
> Hi Sir!
> 
> I have allready configured interface, RIP,FEA,OSPF.
> All are working(i.e i m able to execute commands corresponding to these
> protocols)
> After that i was tring to config. static routes but got that problem.

In that case please send a copy of your configuration (before you
attempt to configure static routes), and a copy (copy-and-paste) of
the xorpsh commands and error messages.

Thanks,
Pavlin

> Regards 
> Arjun
> Original Message:
> -----------------
> From: Pavlin Radoslavov pavlin at icir.org
> Date: Tue, 23 Oct 2007 00:43:28 -0700
> To: arjun at ceeyes.com, pavlin at icir.org, xorp-hackers at icir.org
> Subject: Re: [Xorp-hackers] (no subject) 
> 
> 
> arjun at ceeyes.com <arjun at ceeyes.com> wrote:
> 
> > 
> > Hi!
> > 
> > It didn't work. same error is coming.
> > plz write a sample static config.
> 
> See the "Static Routes" subsection in the "Protocols" section:
> http://www.xorp.org/getting_started.html
> 
> Of course you also need to configure the "interfaces" and the "fea".
> See the above URL for details and sample configurations.
> 
> Pavlin
> 
> > Regards,
> > Arjun
> > 
> > Original Message:
> > -----------------
> > From: Pavlin Radoslavov pavlin at icir.org
> > Date: Mon, 22 Oct 2007 22:41:08 -0700
> > To: arjun at ceeyes.com, xorp-hackers at icir.org
> > Subject: Re: [Xorp-hackers] (no subject) 
> > 
> > 
> > arjun at ceeyes.com <arjun at ceeyes.com> wrote:
> > 
> > >  
> > >  Hi all!
> > > 
> > > 
> > >  I tried to configure static routes through CLI but it failed at
> > >  creating route on 3rd level
> > > 
> > >  i.e
> > >  level 1 protocols {
> > >  level 2 static {
> > >  level 3 route 192.168.131.74/24 {
> > > 
> > >  following error i got at this level 3rd:-
> > > 
> > > syntax error, expecting `<IPv4Net>',or `<IPv6Net>'.
> > 
> > Try to use 192.168.131.00/24 instead of 192.168.131.74/24.
> > The subnet address should have the bits after the netmask set to
> > zero.
> > 
> > Hope that helps,
> > Pavlin
> > 
> > > plz write what should be the in 3rd level and  onwards 
> > > 
> > > Thanking u All in advance
> > > Arjun
> > > 
> > > 
> > > 
> > > 
> > > --------------------------------------------------------------------
> > > mail2web - Check your email from the web at
> > > http://link.mail2web.com/mail2web
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Xorp-hackers mailing list
> > > Xorp-hackers at icir.org
> > > http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
> > 
> > 
> > --------------------------------------------------------------------
> > mail2web.com - Microsoft® Exchange solutions from a leading provider -
> > http://link.mail2web.com/Business/Exchange
> > 
> > 
> > 
> > _______________________________________________
> > Xorp-hackers mailing list
> > Xorp-hackers at icir.org
> > http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
> 
> 
> --------------------------------------------------------------------
> mail2web LIVE – Free email based on Microsoft® Exchange technology -
> http://link.mail2web.com/LIVE
> 
> 
> 
> _______________________________________________
> Xorp-hackers mailing list
> Xorp-hackers at icir.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers



More information about the Xorp-hackers mailing list