[Xorp-hackers] Rotuing issue
Shaw, Pat
Pat.Shaw at gdcanada.com
Wed Jun 13 08:28:19 PDT 2012
I have the following configuration for a 2 routers and 1 switch. The
eth1 address is never advertised to the RIP so packets received on eth0
are never forwarded to eth1 to my switch!! ... Am I configuring the
eth1 interface correctly?
interfaces {
interface eth0 {
vif eth0 {
address 10.0.0.2 {
prefix-length: 24
}
}
}
interface eth1 {
vif eth1 {
address 10.0.1.1 {
prefix-length: 32
}
}
}
}
fea {
unicast-forwarding4 {
disable: false
}
}
policy {
policy-statement connected-to-rip {
term 100 {
from {
protocol:
"connected"
}
then {
metric: 1
}
}
}
}
protocols {
rip {
export: "connected-to-rip"
interface eth0 {
vif eth0 {
address
10.0.0.2 {
disable: false
metric: 1
}
}
}
interface eth1 {
vif eth1 {
address
10.0.1.1 {
disable: false
metric: 1
}
}
}
}
}
Patrick J Shaw
Computer Architect. Vetronics
General Dynamics Canada www.gdcanada.com
613-596-7908
613-796-7803(fax)
The information contained in this e-mail message is PRIVATE. It may contain confidential information and may be legally privileged. It is intended for the exclusive use of the addressee(s). If you are not the intended recipient, you are hereby notified that any dissemination, distribution or reproduction of this communication is strictly prohibited. If the intended recipient(s) cannot be reached or if a transmission problem has occurred, please notify the sender immediately by return e-mail and destroy all copies of this message.
Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-hackers/attachments/20120613/ea13aa88/attachment-0001.html
More information about the Xorp-hackers
mailing list