From pvinod.sarma at freescale.com  Mon May  4 22:12:26 2015
From: pvinod.sarma at freescale.com (pvinod.sarma at freescale.com)
Date: Tue, 5 May 2015 05:12:26 +0000
Subject: [Xorp-hackers] XORP support for powerpc
In-Reply-To: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
References: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
Message-ID: <BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>

Hi ,
I am getting the following error while compiling XORP latetst version to powerpc64 paltform .
Please help in solving this issue .
I am trying to compile using the follwing command :

scons build=powerpc64-fsl-linux CC=powerpc64-fsl-linux-gcc CXX=powerpc64-fsl-linux-g++ STRIP=powerpc64-fsl-linux-strip RANLIB=powerpc64-fsl-linux-ranlib CFLAGS=-I<INCLUDE> LINKFLAGS=-L<LIB_PATH>


powerpc64-fsl-linux-gnu/rtrmgr -Irtrmgr -I. obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.cc
rtrmgr/template.ll:150:1: warning: "/*" within comment [-Wcomment]
  * ftptype        = "A" | "I" | "D" | "a" | "i" | "d"
^
rtrmgr/template.ll:155:2: error: #endif without #if
RE_URL_FTPTYPE "A"|"I"|"D"|"a"|"i"|"d"
  ^
rtrmgr/template.ll: In function 'int tpltlex()':
rtrmgr/template.ll:446:16: error: expected primary-expression before ')' token
    BEGIN(string);
                ^
rtrmgr/template.ll:474:10: error: 'INITIAL' was not declared in this scope
    BEGIN(INITIAL);
          ^
rtrmgr/template.ll:481:7: error: 'comment' was not declared in this scope
"/*"   BEGIN(comment);
       ^
rtrmgr/template.ll:489:7: error: 'INITIAL' was not declared in this scope
<comment>"*"+"/" BEGIN(INITIAL);
       ^
rtrmgr/template.ll:491:7: error: 'one_liner' was not declared in this scope
"%%"    BEGIN(one_liner);
       ^
<stdout>:133:55: error: expected primary-expression before '+' token
<stdout>:9466:6: note: in expansion of macro 'YY_STATE_EOF'
scons: *** [obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.o] Error 1
scons: building terminated because of errors.

Thanks,
Vinod.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-hackers/attachments/20150505/1af1f027/attachment.html 

From greearb at candelatech.com  Tue May  5 08:05:27 2015
From: greearb at candelatech.com (Ben Greear)
Date: Tue, 05 May 2015 08:05:27 -0700
Subject: [Xorp-hackers] XORP support for powerpc
In-Reply-To: <BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>
References: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
	<BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>
Message-ID: <5548DC37.4020302@candelatech.com>

You need to post full instructions for reproducing this, including exactly
how to get and install the compile chain you are using if you want someone
to do serious work to fix this.

In case you are not already using it, please use the xorp source from git,
not the packaged tarballs.

Thanks,
Ben


On 05/04/2015 10:12 PM, pvinod.sarma at freescale.com wrote:
> Hi ,
>
> I am getting the following error while compiling XORP latetst version to powerpc64 paltform .
>
> Please help in solving this issue .
>
> I am trying to compile using the follwing command :
>
> scons build=powerpc64-fsl-linux CC=powerpc64-fsl-linux-gcc CXX=powerpc64-fsl-linux-g++ STRIP=powerpc64-fsl-linux-strip RANLIB=powerpc64-fsl-linux-ranlib CFLAGS=-I<INCLUDE> LINKFLAGS=-L<LIB_PATH>
>
> powerpc64-fsl-linux-gnu/rtrmgr -Irtrmgr -I. obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.cc
>
> rtrmgr/template.ll:150:1: warning: "/*" within comment [-Wcomment]
>
>    * ftptype        = "A" | "I" | "D" | "a" | "i" | "d"
>
> ^
>
> rtrmgr/template.ll:155:2: error: #endif without #if
>
> RE_URL_FTPTYPE "A"|"I"|"D"|"a"|"i"|"d"
>
>    ^
>
> rtrmgr/template.ll: In function 'int tpltlex()':
>
> rtrmgr/template.ll:446:16: error: expected primary-expression before ')' token
>
>      BEGIN(string);
>
>                  ^
>
> rtrmgr/template.ll:474:10: error: 'INITIAL' was not declared in this scope
>
>      BEGIN(INITIAL);
>
>            ^
>
> rtrmgr/template.ll:481:7: error: 'comment' was not declared in this scope
>
> "/*"   BEGIN(comment);
>
>         ^
>
> rtrmgr/template.ll:489:7: error: 'INITIAL' was not declared in this scope
>
> <comment>"*"+"/" BEGIN(INITIAL);
>
>         ^
>
> rtrmgr/template.ll:491:7: error: 'one_liner' was not declared in this scope
>
> "%%"    BEGIN(one_liner);
>
>         ^
>
> <stdout>:133:55: error: expected primary-expression before '+' token
>
> <stdout>:9466:6: note: in expansion of macro 'YY_STATE_EOF'
>
> scons: *** [obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.o] Error 1
>
> scons: building terminated because of errors.
>
> Thanks,
>
> Vinod.
>
>
>
> _______________________________________________
> Xorp-hackers mailing list
> Xorp-hackers at icir.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
>

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


From pvinod.sarma at freescale.com  Tue May 26 07:40:53 2015
From: pvinod.sarma at freescale.com (Pullabhatla Vinod)
Date: Tue, 26 May 2015 14:40:53 +0000
Subject: [Xorp-hackers] XORP support for powerpc
In-Reply-To: <5548DC37.4020302@candelatech.com>
References: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
	<BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>
	<5548DC37.4020302@candelatech.com>
Message-ID: <BLUPR03MB1364CF8F98082812BCD7356F91CC0@BLUPR03MB1364.namprd03.prod.outlook.com>

Hi ,
I cross compiled XORP to powerpc .

Running XORP is giving me parse error . I am seeing the following messages : 

PARSE ERROR : [Template file : <PATH TO FILE> ] syntax error ; last symbol parsed was "bgp" .

I am seeing this error when I run xorp_rtrmgr and also xorpsh . 

What am I doing wrong . Please help me out

Thanks,
Vinod.


-----Original Message-----
From: Ben Greear [mailto:greearb at candelatech.com] 
Sent: Tuesday, May 05, 2015 8:35 PM
To: Sarma P. Vinod-B46178; xorp-hackers at icir.org
Subject: Re: [Xorp-hackers] XORP support for powerpc

You need to post full instructions for reproducing this, including exactly how to get and install the compile chain you are using if you want someone to do serious work to fix this.

In case you are not already using it, please use the xorp source from git, not the packaged tarballs.

Thanks,
Ben


On 05/04/2015 10:12 PM, pvinod.sarma at freescale.com wrote:
> Hi ,
>
> I am getting the following error while compiling XORP latetst version to powerpc64 paltform .
>
> Please help in solving this issue .
>
> I am trying to compile using the follwing command :
>
> scons build=powerpc64-fsl-linux CC=powerpc64-fsl-linux-gcc 
> CXX=powerpc64-fsl-linux-g++ STRIP=powerpc64-fsl-linux-strip 
> RANLIB=powerpc64-fsl-linux-ranlib CFLAGS=-I<INCLUDE> 
> LINKFLAGS=-L<LIB_PATH>
>
> powerpc64-fsl-linux-gnu/rtrmgr -Irtrmgr -I. 
> obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.cc
>
> rtrmgr/template.ll:150:1: warning: "/*" within comment [-Wcomment]
>
>    * ftptype        = "A" | "I" | "D" | "a" | "i" | "d"
>
> ^
>
> rtrmgr/template.ll:155:2: error: #endif without #if
>
> RE_URL_FTPTYPE "A"|"I"|"D"|"a"|"i"|"d"
>
>    ^
>
> rtrmgr/template.ll: In function 'int tpltlex()':
>
> rtrmgr/template.ll:446:16: error: expected primary-expression before 
> ')' token
>
>      BEGIN(string);
>
>                  ^
>
> rtrmgr/template.ll:474:10: error: 'INITIAL' was not declared in this 
> scope
>
>      BEGIN(INITIAL);
>
>            ^
>
> rtrmgr/template.ll:481:7: error: 'comment' was not declared in this 
> scope
>
> "/*"   BEGIN(comment);
>
>         ^
>
> rtrmgr/template.ll:489:7: error: 'INITIAL' was not declared in this 
> scope
>
> <comment>"*"+"/" BEGIN(INITIAL);
>
>         ^
>
> rtrmgr/template.ll:491:7: error: 'one_liner' was not declared in this 
> scope
>
> "%%"    BEGIN(one_liner);
>
>         ^
>
> <stdout>:133:55: error: expected primary-expression before '+' token
>
> <stdout>:9466:6: note: in expansion of macro 'YY_STATE_EOF'
>
> scons: *** [obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.o] Error 1
>
> scons: building terminated because of errors.
>
> Thanks,
>
> Vinod.
>
>
>
> _______________________________________________
> Xorp-hackers mailing list
> Xorp-hackers at icir.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
>

--
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


From greearb at candelatech.com  Tue May 26 08:55:49 2015
From: greearb at candelatech.com (Ben Greear)
Date: Tue, 26 May 2015 08:55:49 -0700
Subject: [Xorp-hackers] XORP support for powerpc
In-Reply-To: <BLUPR03MB1364CF8F98082812BCD7356F91CC0@BLUPR03MB1364.namprd03.prod.outlook.com>
References: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
	<BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>
	<5548DC37.4020302@candelatech.com>
	<BLUPR03MB1364CF8F98082812BCD7356F91CC0@BLUPR03MB1364.namprd03.prod.outlook.com>
Message-ID: <55649785.1010407@candelatech.com>

On 05/26/2015 07:40 AM, Pullabhatla Vinod wrote:
> Hi ,
> I cross compiled XORP to powerpc .
> 
> Running XORP is giving me parse error . I am seeing the following messages : 
> 
> PARSE ERROR : [Template file : <PATH TO FILE> ] syntax error ; last symbol parsed was "bgp" .
> 
> I am seeing this error when I run xorp_rtrmgr and also xorpsh . 
> 
> What am I doing wrong . Please help me out

Hard to say what is the problem.  If you can post directions to reproduce your
environment, or if you want to give me ssh access to your systems, then I can
take a look.

If you don't need bgp, maybe try excluding it from the build.

Thanks,
Ben


> 
> Thanks,
> Vinod.
> 
> 
> -----Original Message-----
> From: Ben Greear [mailto:greearb at candelatech.com] 
> Sent: Tuesday, May 05, 2015 8:35 PM
> To: Sarma P. Vinod-B46178; xorp-hackers at icir.org
> Subject: Re: [Xorp-hackers] XORP support for powerpc
> 
> You need to post full instructions for reproducing this, including exactly how to get and install the compile chain you are using if you want someone to do serious work to fix this.
> 
> In case you are not already using it, please use the xorp source from git, not the packaged tarballs.
> 
> Thanks,
> Ben
> 
> 
> On 05/04/2015 10:12 PM, pvinod.sarma at freescale.com wrote:
>> Hi ,
>>
>> I am getting the following error while compiling XORP latetst version to powerpc64 paltform .
>>
>> Please help in solving this issue .
>>
>> I am trying to compile using the follwing command :
>>
>> scons build=powerpc64-fsl-linux CC=powerpc64-fsl-linux-gcc 
>> CXX=powerpc64-fsl-linux-g++ STRIP=powerpc64-fsl-linux-strip 
>> RANLIB=powerpc64-fsl-linux-ranlib CFLAGS=-I<INCLUDE> 
>> LINKFLAGS=-L<LIB_PATH>
>>
>> powerpc64-fsl-linux-gnu/rtrmgr -Irtrmgr -I. 
>> obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.cc
>>
>> rtrmgr/template.ll:150:1: warning: "/*" within comment [-Wcomment]
>>
>>    * ftptype        = "A" | "I" | "D" | "a" | "i" | "d"
>>
>> ^
>>
>> rtrmgr/template.ll:155:2: error: #endif without #if
>>
>> RE_URL_FTPTYPE "A"|"I"|"D"|"a"|"i"|"d"
>>
>>    ^
>>
>> rtrmgr/template.ll: In function 'int tpltlex()':
>>
>> rtrmgr/template.ll:446:16: error: expected primary-expression before 
>> ')' token
>>
>>      BEGIN(string);
>>
>>                  ^
>>
>> rtrmgr/template.ll:474:10: error: 'INITIAL' was not declared in this 
>> scope
>>
>>      BEGIN(INITIAL);
>>
>>            ^
>>
>> rtrmgr/template.ll:481:7: error: 'comment' was not declared in this 
>> scope
>>
>> "/*"   BEGIN(comment);
>>
>>         ^
>>
>> rtrmgr/template.ll:489:7: error: 'INITIAL' was not declared in this 
>> scope
>>
>> <comment>"*"+"/" BEGIN(INITIAL);
>>
>>         ^
>>
>> rtrmgr/template.ll:491:7: error: 'one_liner' was not declared in this 
>> scope
>>
>> "%%"    BEGIN(one_liner);
>>
>>         ^
>>
>> <stdout>:133:55: error: expected primary-expression before '+' token
>>
>> <stdout>:9466:6: note: in expansion of macro 'YY_STATE_EOF'
>>
>> scons: *** [obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.o] Error 1
>>
>> scons: building terminated because of errors.
>>
>> Thanks,
>>
>> Vinod.
>>
>>
>>
>> _______________________________________________
>> Xorp-hackers mailing list
>> Xorp-hackers at icir.org
>> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
>>
> 
> --
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
> 


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


From pvinod.sarma at freescale.com  Tue May 26 21:00:01 2015
From: pvinod.sarma at freescale.com (Pullabhatla Vinod)
Date: Wed, 27 May 2015 04:00:01 +0000
Subject: [Xorp-hackers] XORP support for powerpc
In-Reply-To: <55649785.1010407@candelatech.com>
References: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
	<BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>
	<5548DC37.4020302@candelatech.com>
	<BLUPR03MB1364CF8F98082812BCD7356F91CC0@BLUPR03MB1364.namprd03.prod.outlook.com>
	<55649785.1010407@candelatech.com>
Message-ID: <BLUPR03MB13648E70D0900165209EC9F691CB0@BLUPR03MB1364.namprd03.prod.outlook.com>

Thanks Ben,
Actually the problem is not just with bgp but with all the template files . When I try to delete bgp.tp and proceed saying xorp_rtrmgr without even specifying any config file I am getting the same error with some other .tp file (fea.tp for instance).

-----Original Message-----
From: Ben Greear [mailto:greearb at candelatech.com] 
Sent: Tuesday, May 26, 2015 9:26 PM
To: Sarma P. Vinod-B46178
Cc: xorp-hackers at icir.org
Subject: Re: [Xorp-hackers] XORP support for powerpc

On 05/26/2015 07:40 AM, Pullabhatla Vinod wrote:
> Hi ,
> I cross compiled XORP to powerpc .
> 
> Running XORP is giving me parse error . I am seeing the following messages : 
> 
> PARSE ERROR : [Template file : <PATH TO FILE> ] syntax error ; last symbol parsed was "bgp" .
> 
> I am seeing this error when I run xorp_rtrmgr and also xorpsh . 
> 
> What am I doing wrong . Please help me out

Hard to say what is the problem.  If you can post directions to reproduce your environment, or if you want to give me ssh access to your systems, then I can take a look.

If you don't need bgp, maybe try excluding it from the build.

Thanks,
Ben


> 
> Thanks,
> Vinod.
> 
> 
> -----Original Message-----
> From: Ben Greear [mailto:greearb at candelatech.com]
> Sent: Tuesday, May 05, 2015 8:35 PM
> To: Sarma P. Vinod-B46178; xorp-hackers at icir.org
> Subject: Re: [Xorp-hackers] XORP support for powerpc
> 
> You need to post full instructions for reproducing this, including exactly how to get and install the compile chain you are using if you want someone to do serious work to fix this.
> 
> In case you are not already using it, please use the xorp source from git, not the packaged tarballs.
> 
> Thanks,
> Ben
> 
> 
> On 05/04/2015 10:12 PM, pvinod.sarma at freescale.com wrote:
>> Hi ,
>>
>> I am getting the following error while compiling XORP latetst version to powerpc64 paltform .
>>
>> Please help in solving this issue .
>>
>> I am trying to compile using the follwing command :
>>
>> scons build=powerpc64-fsl-linux CC=powerpc64-fsl-linux-gcc 
>> CXX=powerpc64-fsl-linux-g++ STRIP=powerpc64-fsl-linux-strip 
>> RANLIB=powerpc64-fsl-linux-ranlib CFLAGS=-I<INCLUDE> 
>> LINKFLAGS=-L<LIB_PATH>
>>
>> powerpc64-fsl-linux-gnu/rtrmgr -Irtrmgr -I. 
>> obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.cc
>>
>> rtrmgr/template.ll:150:1: warning: "/*" within comment [-Wcomment]
>>
>>    * ftptype        = "A" | "I" | "D" | "a" | "i" | "d"
>>
>> ^
>>
>> rtrmgr/template.ll:155:2: error: #endif without #if
>>
>> RE_URL_FTPTYPE "A"|"I"|"D"|"a"|"i"|"d"
>>
>>    ^
>>
>> rtrmgr/template.ll: In function 'int tpltlex()':
>>
>> rtrmgr/template.ll:446:16: error: expected primary-expression before 
>> ')' token
>>
>>      BEGIN(string);
>>
>>                  ^
>>
>> rtrmgr/template.ll:474:10: error: 'INITIAL' was not declared in this 
>> scope
>>
>>      BEGIN(INITIAL);
>>
>>            ^
>>
>> rtrmgr/template.ll:481:7: error: 'comment' was not declared in this 
>> scope
>>
>> "/*"   BEGIN(comment);
>>
>>         ^
>>
>> rtrmgr/template.ll:489:7: error: 'INITIAL' was not declared in this 
>> scope
>>
>> <comment>"*"+"/" BEGIN(INITIAL);
>>
>>         ^
>>
>> rtrmgr/template.ll:491:7: error: 'one_liner' was not declared in this 
>> scope
>>
>> "%%"    BEGIN(one_liner);
>>
>>         ^
>>
>> <stdout>:133:55: error: expected primary-expression before '+' token
>>
>> <stdout>:9466:6: note: in expansion of macro 'YY_STATE_EOF'
>>
>> scons: *** [obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.o] Error 1
>>
>> scons: building terminated because of errors.
>>
>> Thanks,
>>
>> Vinod.
>>
>>
>>
>> _______________________________________________
>> Xorp-hackers mailing list
>> Xorp-hackers at icir.org
>> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
>>
> 
> --
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
> 


--
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com



From greearb at candelatech.com  Tue May 26 22:40:46 2015
From: greearb at candelatech.com (Ben Greear)
Date: Tue, 26 May 2015 22:40:46 -0700
Subject: [Xorp-hackers] XORP support for powerpc
In-Reply-To: <BLUPR03MB13648E70D0900165209EC9F691CB0@BLUPR03MB1364.namprd03.prod.outlook.com>
References: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
	<BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>
	<5548DC37.4020302@candelatech.com>
	<BLUPR03MB1364CF8F98082812BCD7356F91CC0@BLUPR03MB1364.namprd03.prod.outlook.com>
	<55649785.1010407@candelatech.com>
	<BLUPR03MB13648E70D0900165209EC9F691CB0@BLUPR03MB1364.namprd03.prod.outlook.com>
Message-ID: <556558DE.7050506@candelatech.com>

Maybe part of the cross-compile didn't go well.

You might have to dig into the code a bit to figure out
what it is complaining about.

Thanks,
Ben

On 05/26/2015 09:00 PM, Pullabhatla Vinod wrote:
> Thanks Ben,
> Actually the problem is not just with bgp but with all the template files . When I try to delete bgp.tp and proceed saying xorp_rtrmgr without even specifying any config file I am getting the same error with some other .tp file (fea.tp for instance).
>
> -----Original Message-----
> From: Ben Greear [mailto:greearb at candelatech.com]
> Sent: Tuesday, May 26, 2015 9:26 PM
> To: Sarma P. Vinod-B46178
> Cc: xorp-hackers at icir.org
> Subject: Re: [Xorp-hackers] XORP support for powerpc
>
> On 05/26/2015 07:40 AM, Pullabhatla Vinod wrote:
>> Hi ,
>> I cross compiled XORP to powerpc .
>>
>> Running XORP is giving me parse error . I am seeing the following messages :
>>
>> PARSE ERROR : [Template file : <PATH TO FILE> ] syntax error ; last symbol parsed was "bgp" .
>>
>> I am seeing this error when I run xorp_rtrmgr and also xorpsh .
>>
>> What am I doing wrong . Please help me out
>
> Hard to say what is the problem.  If you can post directions to reproduce your environment, or if you want to give me ssh access to your systems, then I can take a look.
>
> If you don't need bgp, maybe try excluding it from the build.
>
> Thanks,
> Ben
>
>
>>
>> Thanks,
>> Vinod.
>>
>>
>> -----Original Message-----
>> From: Ben Greear [mailto:greearb at candelatech.com]
>> Sent: Tuesday, May 05, 2015 8:35 PM
>> To: Sarma P. Vinod-B46178; xorp-hackers at icir.org
>> Subject: Re: [Xorp-hackers] XORP support for powerpc
>>
>> You need to post full instructions for reproducing this, including exactly how to get and install the compile chain you are using if you want someone to do serious work to fix this.
>>
>> In case you are not already using it, please use the xorp source from git, not the packaged tarballs.
>>
>> Thanks,
>> Ben
>>
>>
>> On 05/04/2015 10:12 PM, pvinod.sarma at freescale.com wrote:
>>> Hi ,
>>>
>>> I am getting the following error while compiling XORP latetst version to powerpc64 paltform .
>>>
>>> Please help in solving this issue .
>>>
>>> I am trying to compile using the follwing command :
>>>
>>> scons build=powerpc64-fsl-linux CC=powerpc64-fsl-linux-gcc
>>> CXX=powerpc64-fsl-linux-g++ STRIP=powerpc64-fsl-linux-strip
>>> RANLIB=powerpc64-fsl-linux-ranlib CFLAGS=-I<INCLUDE>
>>> LINKFLAGS=-L<LIB_PATH>
>>>
>>> powerpc64-fsl-linux-gnu/rtrmgr -Irtrmgr -I.
>>> obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.cc
>>>
>>> rtrmgr/template.ll:150:1: warning: "/*" within comment [-Wcomment]
>>>
>>>     * ftptype        = "A" | "I" | "D" | "a" | "i" | "d"
>>>
>>> ^
>>>
>>> rtrmgr/template.ll:155:2: error: #endif without #if
>>>
>>> RE_URL_FTPTYPE "A"|"I"|"D"|"a"|"i"|"d"
>>>
>>>     ^
>>>
>>> rtrmgr/template.ll: In function 'int tpltlex()':
>>>
>>> rtrmgr/template.ll:446:16: error: expected primary-expression before
>>> ')' token
>>>
>>>       BEGIN(string);
>>>
>>>                   ^
>>>
>>> rtrmgr/template.ll:474:10: error: 'INITIAL' was not declared in this
>>> scope
>>>
>>>       BEGIN(INITIAL);
>>>
>>>             ^
>>>
>>> rtrmgr/template.ll:481:7: error: 'comment' was not declared in this
>>> scope
>>>
>>> "/*"   BEGIN(comment);
>>>
>>>          ^
>>>
>>> rtrmgr/template.ll:489:7: error: 'INITIAL' was not declared in this
>>> scope
>>>
>>> <comment>"*"+"/" BEGIN(INITIAL);
>>>
>>>          ^
>>>
>>> rtrmgr/template.ll:491:7: error: 'one_liner' was not declared in this
>>> scope
>>>
>>> "%%"    BEGIN(one_liner);
>>>
>>>          ^
>>>
>>> <stdout>:133:55: error: expected primary-expression before '+' token
>>>
>>> <stdout>:9466:6: note: in expansion of macro 'YY_STATE_EOF'
>>>
>>> scons: *** [obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.o] Error 1
>>>
>>> scons: building terminated because of errors.
>>>
>>> Thanks,
>>>
>>> Vinod.
>>>
>>>
>>>
>>> _______________________________________________
>>> Xorp-hackers mailing list
>>> Xorp-hackers at icir.org
>>> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
>>>
>>
>> --
>> Ben Greear <greearb at candelatech.com>
>> Candela Technologies Inc  http://www.candelatech.com
>>
>
>
> --
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
>

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


From pvinod.sarma at freescale.com  Wed May 27 02:58:04 2015
From: pvinod.sarma at freescale.com (Pullabhatla Vinod)
Date: Wed, 27 May 2015 09:58:04 +0000
Subject: [Xorp-hackers] XORP support for powerpc
In-Reply-To: <556558DE.7050506@candelatech.com>
References: <BLUPR03MB1364336D6862E0A5EAA41F3691090@BLUPR03MB1364.namprd03.prod.outlook.com>
	<BLUPR03MB13644257FAE1ED97E52BE26E91D10@BLUPR03MB1364.namprd03.prod.outlook.com>
	<5548DC37.4020302@candelatech.com>
	<BLUPR03MB1364CF8F98082812BCD7356F91CC0@BLUPR03MB1364.namprd03.prod.outlook.com>
	<55649785.1010407@candelatech.com>
	<BLUPR03MB13648E70D0900165209EC9F691CB0@BLUPR03MB1364.namprd03.prod.outlook.com>
	<556558DE.7050506@candelatech.com>
Message-ID: <BLUPR03MB136403E58CC51958893B931691CB0@BLUPR03MB1364.namprd03.prod.outlook.com>

Ben,
I tried to compile the same to X86 also . It is giving me the same problem . 
I have taken the source from : https://github.com/greearb/xorp.ct 
gcc version :  4.8.2

Thanks,
Vinod. 

-----Original Message-----
From: Ben Greear [mailto:greearb at candelatech.com] 
Sent: Wednesday, May 27, 2015 11:11 AM
To: Sarma P. Vinod-B46178
Cc: xorp-hackers at icir.org
Subject: Re: [Xorp-hackers] XORP support for powerpc

Maybe part of the cross-compile didn't go well.

You might have to dig into the code a bit to figure out what it is complaining about.

Thanks,
Ben

On 05/26/2015 09:00 PM, Pullabhatla Vinod wrote:
> Thanks Ben,
> Actually the problem is not just with bgp but with all the template files . When I try to delete bgp.tp and proceed saying xorp_rtrmgr without even specifying any config file I am getting the same error with some other .tp file (fea.tp for instance).
>
> -----Original Message-----
> From: Ben Greear [mailto:greearb at candelatech.com]
> Sent: Tuesday, May 26, 2015 9:26 PM
> To: Sarma P. Vinod-B46178
> Cc: xorp-hackers at icir.org
> Subject: Re: [Xorp-hackers] XORP support for powerpc
>
> On 05/26/2015 07:40 AM, Pullabhatla Vinod wrote:
>> Hi ,
>> I cross compiled XORP to powerpc .
>>
>> Running XORP is giving me parse error . I am seeing the following messages :
>>
>> PARSE ERROR : [Template file : <PATH TO FILE> ] syntax error ; last symbol parsed was "bgp" .
>>
>> I am seeing this error when I run xorp_rtrmgr and also xorpsh .
>>
>> What am I doing wrong . Please help me out
>
> Hard to say what is the problem.  If you can post directions to reproduce your environment, or if you want to give me ssh access to your systems, then I can take a look.
>
> If you don't need bgp, maybe try excluding it from the build.
>
> Thanks,
> Ben
>
>
>>
>> Thanks,
>> Vinod.
>>
>>
>> -----Original Message-----
>> From: Ben Greear [mailto:greearb at candelatech.com]
>> Sent: Tuesday, May 05, 2015 8:35 PM
>> To: Sarma P. Vinod-B46178; xorp-hackers at icir.org
>> Subject: Re: [Xorp-hackers] XORP support for powerpc
>>
>> You need to post full instructions for reproducing this, including exactly how to get and install the compile chain you are using if you want someone to do serious work to fix this.
>>
>> In case you are not already using it, please use the xorp source from git, not the packaged tarballs.
>>
>> Thanks,
>> Ben
>>
>>
>> On 05/04/2015 10:12 PM, pvinod.sarma at freescale.com wrote:
>>> Hi ,
>>>
>>> I am getting the following error while compiling XORP latetst version to powerpc64 paltform .
>>>
>>> Please help in solving this issue .
>>>
>>> I am trying to compile using the follwing command :
>>>
>>> scons build=powerpc64-fsl-linux CC=powerpc64-fsl-linux-gcc 
>>> CXX=powerpc64-fsl-linux-g++ STRIP=powerpc64-fsl-linux-strip 
>>> RANLIB=powerpc64-fsl-linux-ranlib CFLAGS=-I<INCLUDE> 
>>> LINKFLAGS=-L<LIB_PATH>
>>>
>>> powerpc64-fsl-linux-gnu/rtrmgr -Irtrmgr -I.
>>> obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.cc
>>>
>>> rtrmgr/template.ll:150:1: warning: "/*" within comment [-Wcomment]
>>>
>>>     * ftptype        = "A" | "I" | "D" | "a" | "i" | "d"
>>>
>>> ^
>>>
>>> rtrmgr/template.ll:155:2: error: #endif without #if
>>>
>>> RE_URL_FTPTYPE "A"|"I"|"D"|"a"|"i"|"d"
>>>
>>>     ^
>>>
>>> rtrmgr/template.ll: In function 'int tpltlex()':
>>>
>>> rtrmgr/template.ll:446:16: error: expected primary-expression before 
>>> ')' token
>>>
>>>       BEGIN(string);
>>>
>>>                   ^
>>>
>>> rtrmgr/template.ll:474:10: error: 'INITIAL' was not declared in this 
>>> scope
>>>
>>>       BEGIN(INITIAL);
>>>
>>>             ^
>>>
>>> rtrmgr/template.ll:481:7: error: 'comment' was not declared in this 
>>> scope
>>>
>>> "/*"   BEGIN(comment);
>>>
>>>          ^
>>>
>>> rtrmgr/template.ll:489:7: error: 'INITIAL' was not declared in this 
>>> scope
>>>
>>> <comment>"*"+"/" BEGIN(INITIAL);
>>>
>>>          ^
>>>
>>> rtrmgr/template.ll:491:7: error: 'one_liner' was not declared in 
>>> this scope
>>>
>>> "%%"    BEGIN(one_liner);
>>>
>>>          ^
>>>
>>> <stdout>:133:55: error: expected primary-expression before '+' token
>>>
>>> <stdout>:9466:6: note: in expansion of macro 'YY_STATE_EOF'
>>>
>>> scons: *** [obj/powerpc64-fsl-linux-gnu/rtrmgr/lex.tplt.o] Error 1
>>>
>>> scons: building terminated because of errors.
>>>
>>> Thanks,
>>>
>>> Vinod.
>>>
>>>
>>>
>>> _______________________________________________
>>> Xorp-hackers mailing list
>>> Xorp-hackers at icir.org
>>> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
>>>
>>
>> --
>> Ben Greear <greearb at candelatech.com>
>> Candela Technologies Inc  http://www.candelatech.com
>>
>
>
> --
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
>

--
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com