[Xorp-users] A sample config.boot for linux to test pim part of xorp.

[Gernot W. Schmied]

Pavlin Radoslavov wrote:
>>>I have downloaded and compiled xorp on a linux box and i would like use it
>>>as multicast gateway. I would like to know if some one can provide an 
>>>sample config.boot for my test. I have two interfaces on which i want to run
>>>pim (eth3 and eth2 ) and the RP i should use is any cast static RP.
>>>
>>>I have try to use sample config.boot provided by the source code but there
>>>no sample for the pim part of xorp.
>>>
>>>I have already test this  doing modification on configure_pim file and running 
>>>test_pim and it work well. but I would like also test rtrmgr.
>>
>>Philippe,
>>
>>Below I am including a sample config file that you can use for
>>multicast routing. If you are going to use static RPs, then you need
>>only to uncomment the static-rps section and add your RPs.
> 
> 
> Opps, I forgot to mention that you must use the lastest code from
> the CVS repository. In other words, release-0.5 won't work with the
> configuration I sent you.
> 
> Pavlin
> _______________________________________________
> Xorp-users mailing list
> Xorp-users@xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
> 

Hi Pavlin,

Any hints about the release date of XORP 1.0 :-)))?

Regards,
Gernot