[Xorp-users] "no vif found" <- how do I fix this.

[Pavlin Radoslavov]

> [ 2005/04/30 17:10:24 WARNING xorp_fea MFEA ] proto_socket_read()
> failed: RX packet from 192.168.10.1 to 224.0.0.2: no vif found
> [ 2005/04/30 17:10:27 WARNING xorp_fea MFEA ] proto_socket_read()
> failed: RX packet from 192.168.10.1 to 224.0.0.1: no vif found
> 
> These packets are pim-sm v2 packets.
> 17:10:35.230052 IP (tos 0xc0, ttl   1, id 4215, offset 0, flags
> [none], length: 58, optlength: 4 ( RA )) 192.168.10.1 >
> PIM-ROUTERS.MCAST.NET: pim v2 Hello (Hold-time 1m45s)
> (LAN-Prune-Delay: T-bit=3D0 lan-delay=3D500ms override-interval=3D2500ms)
> (DR-Priority: 1) (Genid: 0x515a96ed)

Does 192.168.10.1 belong to a router that is directly connected to
your XORP router?
If yes, which interface shares the same subnet address as
192.168.10.1: eth0, off0, or is it an interface that is not used by
XORP?
If no, what kind of routers do you have on the path between your
XORP router and 192.168.10.1?

Thanks,
Pavlin