[Xorp-users] RIP XORP 1.1RC between Juniper M10
Caldwell Jason
caldwell_jason@bah.com
Wed, 4 May 2005 16:00:24 -0400
This is a multi-part message in MIME format.
------_=_NextPart_001_01C550E3.E8FBE696
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Pavlin,
Im trying to configure RIP between my XORP 1.1-RC OpenBSD3.6 router and =
my Juniper M10 router v6.1R1.4, below are my configuration for both =
routers... Basically it seems that both routers are configured =
correctly and seem to have RIP enabled... On my console window of the =
XORP router Im receiving the error below... Thanks, Jason...
------
XORP Error
[ 2005/05/04 15:14:17 WARNING xorp_fea XrlSocketServerTarget ] Handling =
method for socket4/0.1/send_from_multicast_if failed: XrlCmdError 102 =
Command failed Host is down
[ 2005/05/04 15:14:17 ERROR xorp_rip:16796 RIP +526 port.cc =
port_io_send_completion ] Send failed
------
------
XORP Config's
protocols {
rip {
targetname: "rip"
export connected {
metric: 1
tag: 0
}
interface em0 {
vif em0 {
address 1.10.2.10 {
metric: 1
horizon: "split-horizon-poison-reverse"
disable: false
passive: false
accept-non-rip-requests: true
accept-default-route: true
advertise-default-route: false
route-expiry-secs: 180
route-deletion-secs: 120
triggered-update-min-secs: 1
triggered-update-max-secs: 5
table-announce-min-secs: 25
table-announce-max-secs: 35
table-request-secs: 1
interpacket-delay-msecs: 50
}
}
}
}
}
------
XORP> run show rip status all
* RIP on em0 em0 1.10.2.10
Status: enabled
------
XORP> run show rip statistics all
* RIP on em0 em0 1.10.2.10
Status: enabled
Counter Value
-------------------------------- ----------------
Requests Sent 186027
Updates Sent 6308
Triggered Updates Sent 0
Non-RIP Updates Sent 0
Total Packets Received 0
Request Packets Received 0
Update Packets Received 0
Bad Packets Received 0
Authentication Failures 0
Bad Routes Received 0
Non-RIP Requests Received 0
------
XORP> run show route table ipv4 unicast rip
Network 1.10.2.0/24
Nexthop :=3D 1.10.2.10
Metric :=3D 1 Protocol :=3D rip Interface :=3D em0 Vif =
:=3D em0
Network 12.0.0.0/24
Nexthop :=3D 12.0.0.1
Metric :=3D 1 Protocol :=3D rip Interface :=3D xl1 Vif =
:=3D xl1
Network 14.0.0.0/24
Nexthop :=3D 14.0.0.1
Metric :=3D 1 Protocol :=3D rip Interface :=3D xl0 Vif =
:=3D xl0
------
------
Juniper Config's;
M10# run show configuration protocols rip
group xorp {
neighbor fe-1/1/0.0 {
receive both;
}
neighbor fe-1/1/1.0 {
receive both;
}
}
------
M10# run show rip neighbor logical-router all
logical-router: default
Source Destination Send Receive =
In
Neighbor State Address Address Mode Mode =
Met
-------- ----- ------- ----------- ---- ------- =
---
fe-1/1/1.0 Up 1.11.2.2 224.0.0.9 mcast both =
1
fe-1/1/0.0 Up 1.10.2.3 224.0.0.9 mcast both =
1
------
M10# run show rip statistics
RIPv2 info: port 520; update interval 30s; holddown 180s; timeout 120s.
rts learned rts held down rqsts dropped resps dropped
0 0 0 0
fe-1/1/1.0: 0 routes learned; 0 routes advertised
Counter Total Last 5 min Last minute
------- ----------- ----------- -----------
Updates Sent 0 0 0
Triggered Updates Sent 0 0 0
Responses Sent 0 0 0
Bad Messages 0 0 0
RIPv1 Updates Received 0 0 0
RIPv1 Bad Route Entries 0 0 0
RIPv1 Updates Ignored 0 0 0
RIPv2 Updates Received 0 0 0
RIPv2 Bad Route Entries 0 0 0
RIPv2 Updates Ignored 0 0 0
Authentication Failures 0 0 0
RIP Requests Received 0 0 0
RIP Requests Ignored 0 0 0
fe-1/1/0.0: 0 routes learned; 0 routes advertised
Counter Total Last 5 min Last minute
------- ----------- ----------- -----------
Updates Sent 0 0 0
Triggered Updates Sent 0 0 0
Responses Sent 0 0 0
Bad Messages 0 0 0
RIPv1 Updates Received 0 0 0
RIPv1 Bad Route Entries 0 0 0
RIPv1 Updates Ignored 0 0 0
RIPv2 Updates Received 0 0 0
RIPv2 Bad Route Entries 0 0 0
RIPv2 Updates Ignored 0 0 0
Authentication Failures 0 0 0
RIP Requests Received 0 0 0
RIP Requests Ignored 0 0 0
=20
~~~~~~~
Jason Caldwell=20
Booz | Allen | Hamilton=20
900 Elkridge Landing Road (Office 322)=20
Linthicum, MD 21090=20
410.684.6567 Office=20
Caldwell_Jason@bah.com=20
------_=_NextPart_001_01C550E3.E8FBE696
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
6.5.7226.0">
<TITLE>RIP XORP 1.1RC between Juniper M10 </TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=3D2>Pavlin,<BR>
<BR>
Im trying to configure RIP between my XORP 1.1-RC OpenBSD3.6 router and =
my Juniper M10 router v6.1R1.4, below are my configuration for both =
routers... Basically it seems that both routers are configured =
correctly and seem to have RIP enabled... On my console window of the =
XORP router Im receiving the error below... Thanks, Jason...<BR>
<BR>
------<BR>
XORP Error<BR>
[ 2005/05/04 15:14:17 WARNING xorp_fea XrlSocketServerTarget ] Handling =
method for socket4/0.1/send_from_multicast_if failed: XrlCmdError 102 =
Command failed Host is down<BR>
[ 2005/05/04 15:14:17 ERROR xorp_rip:16796 RIP +526 port.cc =
port_io_send_completion ] Send failed<BR>
------<BR>
<BR>
------<BR>
XORP Config's<BR>
protocols {<BR>
rip {<BR>
=
targetname: "rip"<BR>
=
export connected {<BR>
&=
nbsp; metric: 1<BR>
&=
nbsp; tag: 0<BR>
}<BR>
=
interface em0 {<BR>
&=
nbsp; vif em0 {<BR>
&=
nbsp; address 1.10.2.10 {<BR>
&=
nbsp; =
metric: 1<BR>
&=
nbsp; =
horizon: "split-horizon-poison-reverse"<BR>
&=
nbsp; =
disable: false<BR>
&=
nbsp; =
passive: false<BR>
&=
nbsp; =
accept-non-rip-requests: true<BR>
&=
nbsp; =
accept-default-route: true<BR>
&=
nbsp; =
advertise-default-route: false<BR>
&=
nbsp; =
route-expiry-secs: 180<BR>
&=
nbsp; =
route-deletion-secs: 120<BR>
&=
nbsp; =
triggered-update-min-secs: 1<BR>
&=
nbsp; =
triggered-update-max-secs: 5<BR>
&=
nbsp; =
table-announce-min-secs: 25<BR>
&=
nbsp; =
table-announce-max-secs: 35<BR>
&=
nbsp; =
table-request-secs: 1<BR>
&=
nbsp; =
interpacket-delay-msecs: 50<BR>
&=
nbsp; }<BR>
&=
nbsp; }<BR>
}<BR>
}<BR>
}<BR>
------<BR>
XORP> run show rip status all<BR>
<BR>
* RIP on em0 em0 1.10.2.10<BR>
Status: enabled<BR>
------<BR>
XORP> run show rip statistics all<BR>
<BR>
* RIP on em0 em0 1.10.2.10<BR>
Status: enabled<BR>
<BR>
=
Counter =
&=
nbsp; &n=
bsp; Value<BR>
-------------------------------- ----------------<BR>
Requests =
Sent &nb=
sp; &nbs=
p; 186027<BR>
Updates =
Sent &nb=
sp; &nbs=
p; 6308<BR>
Triggered Updates =
Sent &nb=
sp; &nbs=
p; 0<BR>
Non-RIP Updates =
Sent &nb=
sp; &nbs=
p; 0<BR>
Total Packets =
Received  =
; =
0<BR>
Request Packets =
Received  =
; =
0<BR>
Update Packets =
Received  =
; =
0<BR>
Bad Packets =
Received  =
; =
0<BR>
Authentication =
Failures  =
; =
0<BR>
Bad Routes =
Received  =
; =
0<BR>
Non-RIP Requests =
Received  =
; =
0<BR>
------<BR>
XORP> run show route table ipv4 unicast rip<BR>
Network 1.10.2.0/24<BR>
Nexthop :=3D 1.10.2.10<BR>
Metric :=3D =
1 Protocol :=3D rip Interface :=3D =
em0 Vif :=3D em0<BR>
Network 12.0.0.0/24<BR>
Nexthop :=3D 12.0.0.1<BR>
Metric :=3D =
1 Protocol :=3D rip Interface :=3D =
xl1 Vif :=3D xl1<BR>
Network 14.0.0.0/24<BR>
Nexthop :=3D 14.0.0.1<BR>
Metric :=3D =
1 Protocol :=3D rip Interface :=3D =
xl0 Vif :=3D xl0<BR>
------<BR>
<BR>
------<BR>
Juniper Config's;<BR>
M10# run show configuration protocols rip<BR>
group xorp {<BR>
neighbor fe-1/1/0.0 {<BR>
receive both;<BR>
}<BR>
neighbor fe-1/1/1.0 {<BR>
receive both;<BR>
}<BR>
}<BR>
<BR>
------<BR>
M10# run show rip neighbor logical-router all<BR>
<BR>
logical-router: default<BR>
&=
nbsp; =
Source =
Destination Send Receive =
In<BR>
Neighbor =
State Address =
Address Mode =
Mode Met<BR>
-------- =
----- ------- =
----------- ---- ------- =
---<BR>
fe-1/1/1.0 =
Up 1.11.2.2 =
224.0.0.9 mcast =
both 1<BR>
fe-1/1/0.0 =
Up 1.10.2.3 =
224.0.0.9 mcast =
both 1<BR>
------<BR>
M10# run show rip statistics<BR>
RIPv2 info: port 520; update interval 30s; holddown 180s; timeout =
120s.<BR>
rts learned rts held down rqsts =
dropped resps dropped<BR>
&=
nbsp; =
0 =
=
0 =
=
0 =
0<BR>
<BR>
fe-1/1/1.0: 0 routes learned; 0 routes advertised<BR>
Counter =
&=
nbsp; Total Last 5 min Last minute<BR>
------- =
----------- =
----------- -----------<BR>
Updates =
Sent &nb=
sp; =
0 =
0 =
0<BR>
Triggered Updates =
Sent &nb=
sp; =
0 =
0 =
0<BR>
Responses =
Sent &nb=
sp; =
0 =
0 =
0<BR>
Bad =
Messages  =
; =
0 =
0 =
0<BR>
RIPv1 Updates =
Received  =
; =
0 =
0 =
0<BR>
RIPv1 Bad Route =
Entries =
=
0 =
0 =
0<BR>
RIPv1 Updates =
Ignored =
=
0 =
0 =
0<BR>
RIPv2 Updates =
Received  =
; =
0 =
0 =
0<BR>
RIPv2 Bad Route =
Entries =
=
0 =
0 =
0<BR>
RIPv2 Updates =
Ignored =
=
0 =
0 =
0<BR>
Authentication =
Failures  =
; =
0 =
0 =
0<BR>
RIP Requests =
Received  =
; =
0 =
0 =
0<BR>
RIP Requests =
Ignored =
=
0 =
0 =
0<BR>
<BR>
fe-1/1/0.0: 0 routes learned; 0 routes advertised<BR>
Counter =
&=
nbsp; Total Last 5 min Last minute<BR>
------- =
----------- =
----------- -----------<BR>
Updates =
Sent &nb=
sp; =
0 =
0 =
0<BR>
Triggered Updates =
Sent &nb=
sp; =
0 =
0 =
0<BR>
Responses =
Sent &nb=
sp; =
0 =
0 =
0<BR>
Bad =
Messages  =
; =
0 =
0 =
0<BR>
RIPv1 Updates =
Received  =
; =
0 =
0 =
0<BR>
RIPv1 Bad Route =
Entries =
=
0 =
0 =
0<BR>
RIPv1 Updates =
Ignored =
=
0 =
0 =
0<BR>
RIPv2 Updates =
Received  =
; =
0 =
0 =
0<BR>
RIPv2 Bad Route =
Entries =
=
0 =
0 =
0<BR>
RIPv2 Updates =
Ignored =
=
0 =
0 =
0<BR>
Authentication =
Failures  =
; =
0 =
0 =
0<BR>
RIP Requests =
Received  =
; =
0 =
0 =
0<BR>
RIP Requests =
Ignored =
=
0 =
0 =
0<BR>
<BR>
<BR>
<BR>
~~~~~~~<BR>
Jason Caldwell<BR>
Booz | Allen | Hamilton<BR>
900 Elkridge Landing Road (Office 322)<BR>
Linthicum, MD 21090<BR>
410.684.6567 Office<BR>
Caldwell_Jason@bah.com<BR>
</FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C550E3.E8FBE696--