[Xorp-users] compiling problems
Diogo Della
ap010@terra.com.br
Fri, 20 May 2005 11:47:35 -0300
--_=__=_XaM3_.1116600455.2A.158169.42.18709.52.42.007.507554675
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
For what I read, the documentation do not obligate a xorp group, but I ad=
ded and the errors are the same.
I don't think I have any RTF_REJECT (Flag R) at netstat as shown in APEND=
IX I. About RTF_DISCARD, I did not find at is the flag of this.
I did not find what is a soft discard interface and how to configure it a=
t the User's Manual and the getting started.
I have already installed XORP, but there were some errors as I said previ=
ously. What do you mean about Click?
Best Regards,
Diogo Della
########### APENDIX I ###############
router1# netstat -nr
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expir=
e
default 192.168.67.122 UGSc 0 5 sis0
127.0.0.1 127.0.0.1 UH 0 220706 lo0
192.168.67 link#1 UC 11 0 sis0
192.168.67.2 00:60:1d:f4:d3:34 UHLW 0 19674 sis0 116=
9
192.168.67.3 00:60:1d:f4:d2:d6 UHLW 0 10062 sis0 117=
9
192.168.67.5 00:60:94:19:57:4a UHLW 1 2179 sis0 118=
1
192.168.67.49 00:90:4b:4f:85:16 UHLW 0 13083 sis0 80=
3
192.168.67.92 00:20:35:71:d6:e1 UHLW 0 156 sis0 90=
3
192.168.67.93 00:10:b5:54:0a:ac UHLW 0 9 sis0 36=
7
192.168.67.106 00:0c:6e:b2:f2:ef UHLW 1 14005 sis0 118=
4
192.168.67.122 00:80:5f:31:d9:74 UHLW 1 2 sis0 117=
8
192.168.67.126 00:0c:6e:33:0a:94 UHLW 0 147 sis0 80=
0
192.168.67.161 00:0c:6e:00:68:d3 UHLW 0 15 lo0
192.168.67.177 00:01:e6:76:8c:5d UHLW 0 4 sis0 27=
1
192.168.68 link#2 UC 1 0 fxp0
192.168.68.2 00:04:ac:25:ec:e5 UHLW 1 26466 fxp0 117=
6
Internet6:
Destination Gateway Flags =
Netif Expire
::/96 ::1 UGRSc =
lo0
::1 ::1 UH =
lo0
::ffff:0.0.0.0/96 ::1 UGRSc =
lo0
fe80::/10 ::1 UGRSc =
lo0
fe80::%sis0/64 link#1 UC =
sis0
fe80::20c:6eff:fe00:68d3%sis0 00:0c:6e:00:68:d3 UHL =
lo0
fe80::%fxp0/64 link#2 UC =
fxp0
fe80::260:94ff:fe63:d554%fxp0 00:60:94:63:d5:54 UHL =
lo0
fe80::%lo0/64 fe80::1%lo0 Uc =
lo0
fe80::1%lo0 link#5 UHL =
lo0
ff01::/32 ::1 U =
lo0
ff02::/16 ::1 UGRS =
lo0
ff02::%sis0/32 link#1 UC =
sis0
ff02::%fxp0/32 link#2 UC =
fxp0
ff02::%lo0/32 ::1 UC =
lo0
----- Original Message -----
From: Bruce M Simpson
To: Diogo Della
Cc: xorp-users@xorp.org
Sent: Thursday, May 19, 2005 8:47 AM
Subject: Re: [Xorp-users] compiling problems
On Wed, May 18, 2005 at 10:06:09PM -0300, Diogo Della wrote:
> I'm having problems compiling Xorp 1.1.
The error messages you report raise the following questions:-
Did you create the user and group 'xorp' on your system (as explained
in the documentation) ?
Did you have any RTF_REJECT or RTF_DISCARD routes in your kernel forwardi=
ng
table (as shown by netstat -rn) before running XORP?
Does your configuration file contain a soft discard interface (needed if =
you
intend to do blackhole routing on FreeBSD or Linux) ?
Are you attempting to use Click without having installed it first?
_______________________________________________
Xorp-users mailing list
Xorp-users@xorp.org
http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
--_=__=_XaM3_.1116600455.2A.158169.42.18709.52.42.007.507554675
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
<DIV style=3D"FONT-SIZE: 14px; FONT-FAMILY: verdana, arial">
<DIV>
<DIV style=3D"FONT: 10pt arial">For what I read, the documentation do not=
obligate a xorp group, but I added and the errors are the same.</DIV>
<DIV style=3D"FONT: 10pt arial"> </DIV>
<DIV style=3D"FONT: 10pt arial">I don't think I have any RTF_REJECT (Flag=
R) at netstat as shown in APENDIX I. About RTF_DISCARD, I did not find a=
t is the flag of this.</DIV>
<DIV style=3D"FONT: 10pt arial"> </DIV>
<DIV style=3D"FONT: 10pt arial">I did not find what is a soft discard int=
erface and how to configure it at the User's Manual and the getting start=
ed.</DIV>
<DIV style=3D"FONT: 10pt arial"> </DIV>
<DIV style=3D"FONT: 10pt arial">I have already installed XORP, but there =
were some errors as I said previously. What do you mean about Click?</DIV=
>
<DIV style=3D"FONT: 10pt arial"> </DIV>
<DIV style=3D"FONT: 10pt arial">Best Regards,</DIV>
<DIV style=3D"FONT: 10pt arial"> </DIV>
<DIV style=3D"FONT: 10pt arial">Diogo Della</DIV>
<DIV style=3D"FONT: 10pt arial"> </DIV>
<DIV style=3D"FONT: 10pt arial">########### APENDIX I #############=
##</DIV>
<DIV style=3D"FONT: 10pt arial"><FONT face=3DCourier>router1# netstat -nr=
<BR>Routing tables</FONT></DIV>
<DIV style=3D"FONT: 10pt arial"><FONT face=3DCourier>Internet:<BR>Destina=
tion Gateway &=
nbsp; Flags R=
efs Use Netif Expire<BR>default =
192.168.67.1=
22 UGSc =
0 5 sis0<BR>127.0.=
0.1 127.0.0.1 =
UH &nbs=
p; 0 220706 l=
o0<BR>192.168.67 link#1&n=
bsp; UC=
11 &nbs=
p; 0 sis0<BR>192.168.67.2 =
00:60:1d:f4:d3:34 UHLW &n=
bsp; 0 19674 sis0 1=
169<BR>192.168.67.3 00:60:1d:f4:d2:d6=
UHLW 0 =
10062 sis0 1179<BR>192.168.67.5  =
; 00:60:94:19:57:4a UHLW &=
nbsp; 1 2179 sis0 &n=
bsp; 1181<BR>192.168.67.49 00:90:4b:4f:85:1=
6 UHLW 0  =
; 13083 sis0 803<BR>192.168.67.92 &nbs=
p; 00:20:35:71:d6:e1 UHLW =
0 156 sis0&n=
bsp; 903<BR>192.168.67.93 00:10=
:b5:54:0a:ac UHLW 0 =
9 sis0 =
367<BR>192.168.67.106 00:0c:6e:b2:f2:ef UH=
LW 1 14005&nb=
sp; sis0 1184<BR>192.168.67.122 =
00:80:5f:31:d9:74 UHLW 1=
2 sis0 =
1178<BR>192.168.67.126 00:0c:6e:33:0a:94 U=
HLW 0 &n=
bsp; 147 sis0 800<BR>192.168.67.161 &n=
bsp; 00:0c:6e:00:68:d3 UHLW &nbs=
p; 0 15 =
lo0<BR>192.168.67.177 00:01:e6:76:8c:5d UH=
LW 0 &nb=
sp; 4 sis0 271<BR>192.168.68&nb=
sp; link#2 &nb=
sp; UC &=
nbsp; 1 =
0 fxp0<BR>192.168.68.2 &n=
bsp; 00:04:ac:25:ec:e5 UHLW &nbs=
p; 1 26466 fxp0 1176</FONT></DI=
V>
<DIV style=3D"FONT: 10pt arial"><FONT face=3DCourier>Internet6:<BR>Destin=
ation &n=
bsp; Gateway&=
nbsp; &n=
bsp; Flags &nb=
sp; Netif Expire<BR>::/96 =
&=
nbsp; ::1&nbs=
p;  =
; =
UGRSc lo0<BR>::1 &n=
bsp; &nb=
sp; &nbs=
p; ::1 &=
nbsp; &n=
bsp; UH =
lo0<BR>::ffff:0.0.0.0/96 =
::1&nb=
sp; &nbs=
p;  =
; UGRSc lo0<BR>fe80::/10 &=
nbsp; &n=
bsp; ::1 =
; =
&=
nbsp; UGRSc lo0<BR>fe80::%sis0/64&nbs=
p;  =
; link#1  =
; =
UC &nbs=
p; sis0<BR>fe80::20c:6eff:fe00:68d3%sis0 &nb=
sp; 00:0c:6e:00:68:d3 &nbs=
p; UHL =
lo0<BR>fe80::%fxp0/64 &nbs=
p; link#2&nbs=
p;  =
; UC &nb=
sp; fxp0<BR>fe80::260:94ff:fe63:d554%=
fxp0 00:60:94:63:d5:54 &nb=
sp; UHL =
lo0<BR>fe80::%lo0/64 &nbs=
p;  =
; fe80::1%lo0 =
Uc&nbs=
p; lo0<BR>fe80::1%lo0&nbs=
p;  =
; link#5  =
; =
UHL &nb=
sp; lo0<BR>ff01::/32  =
; =
::1 &nb=
sp; &nbs=
p; U &nb=
sp; lo0<BR>ff02::/16 =
; =
::1&nb=
sp; &nbs=
p;  =
; UGRS lo0<BR>ff02::%sis0=
/32 &nbs=
p; link#1 &nbs=
p;  =
; UC &nb=
sp; sis0<BR>ff02::%fxp0/32  =
; =
link#2 =
&=
nbsp; UC fxp0<BR>ff=
02::%lo0/32 &n=
bsp; ::1  =
; =
=
UC lo0<BR></FONT></=
DIV>
<DIV style=3D"FONT: 10pt arial"> </DIV>
<DIV style=3D"FONT: 10pt arial">----- Original Message -----
<DIV style=3D"BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> <A tit=
le=3Dbms@spc.org href=3D"http://by103fd.bay103.hotmail.msn.com/cgi-bin/co=
mpose?mailto=3D1&msg=3DCA560AA4-722A-4590-BB4E-36D648E88613&start=
=3D0&len=3D6446&src=3D&type=3Dx&to=3Dbms@spc.org&cc=3D=
&bcc=3D&subject=3D&body=3D&curmbox=3D00000000-0000-0000-0=
000-000000000001&a=3D7d92264512f3fa6c4988ab6413907f57">Bruce M Simpso=
n</A> </DIV>
<DIV><B>To:</B> <A title=3Dap010@terra.com.br href=3D"http://by103fd.bay1=
03.hotmail.msn.com/cgi-bin/compose?mailto=3D1&msg=3DCA560AA4-722A-459=
0-BB4E-36D648E88613&start=3D0&len=3D6446&src=3D&type=3Dx&=
amp;to=3Dap010@terra.com.br&cc=3D&bcc=3D&subject=3D&body=3D=
&curmbox=3D00000000-0000-0000-0000-000000000001&a=3D7d92264512f3f=
a6c4988ab6413907f57">Diogo Della</A> </DIV>
<DIV><B>Cc:</B> <A title=3Dxorp-users@xorp.org href=3D"http://by103fd.bay=
103.hotmail.msn.com/cgi-bin/compose?mailto=3D1&msg=3DCA560AA4-722A-45=
90-BB4E-36D648E88613&start=3D0&len=3D6446&src=3D&type=3Dx=
&to=3Dxorp-users@xorp.org&cc=3D&bcc=3D&subject=3D&bod=
y=3D&curmbox=3D00000000-0000-0000-0000-000000000001&a=3D7d9226451=
2f3fa6c4988ab6413907f57">xorp-users@xorp.org</A> </DIV>
<DIV><B>Sent:</B> Thursday, May 19, 2005 8:47 AM</DIV>
<DIV><B>Subject:</B> Re: [Xorp-users] compiling problems</DIV></DIV>
<DIV><BR></DIV>On Wed, May 18, 2005 at 10:06:09PM -0300, Diogo Della wrot=
e:<BR>> I'm having problems compiling Xorp 1.1.<BR><BR>The error messa=
ges you report raise the following questions:-<BR><BR>Did you create the =
user and group 'xorp' on your system (as explained<BR>in the documentatio=
n) ?<BR><BR>Did you have any RTF_REJECT or RTF_DISCARD routes in your ker=
nel forwarding<BR>table (as shown by netstat -rn) before running XORP?<BR=
><BR>Does your configuration file contain a soft discard interface (neede=
d if you<BR>intend to do blackhole routing on FreeBSD or Linux) ?<BR><BR>=
Are you attempting to use Click without having installed it first?<BR>___=
____________________________________________<BR>Xorp-users mailing list<B=
R><A href=3D"http://by103fd.bay103.hotmail.msn.com/cgi-bin/compose?mailto=
=3D1&msg=3DCA560AA4-722A-4590-BB4E-36D648E88613&start=3D0&len=
=3D6446&src=3D&type=3Dx&to=3DXorp-users@xorp.org&cc=3D&am=
p;bcc=3D&subject=3D&body=3D&curmbox=3D00000000-0000-0000-0000=
-000000000001&a=3D7d92264512f3fa6c4988ab6413907f57">Xorp-users@xorp.o=
rg</A><BR><A href=3D"javascript:ol('http://mailman.ICSI.Berkeley.EDU/mail=
man/listinfo/xorp-users');">http://mailman.ICSI.Berkeley.EDU/mailman/list=
info/xorp-users</A></DIV></DIV>
--_=__=_XaM3_.1116600455.2A.158169.42.18709.52.42.007.507554675--