[Xorp-users] Cand-RP is ignored

[Carsten Otto]

On Wed, May 24, 2006 at 11:59:07AM -0700, Pavlin Radoslavov wrote:
> The sending of the Cand-RP-Adv message happens inside
> PimVif::pim_cand_rp_adv_send(), so you may want to add some
> XLOG_INFO() there to print various info (BTW, don't use printf(),
> because the message may not be displayed immediately).

The packet is being sent - but not with the right addresses I think.
the "src_addr" (retrieved from domain__wide_addr()) is the internal
interface IP (134.130.48.1). This IP is routable, but not part of the
transport LAN which connects to the rest of the world (including the BSR).
Is this wrong?

eth0         UP       Sparse 2 DR              1 134.130.48.1            0
eth1         UP       Sparse 2 DR              1 137.226.119.114         1
register_vif UP       Sparse 2 DR              1 134.130.48.1            0

eth1 is the outgoing interface, which has the default route. I think packets
to the BSR should be sent with eth1's IP.

Ciao,
-- 
Carsten Otto
c-otto at gmx.de
www.c-otto.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 191 bytes
Desc: not available
Url : http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20060525/fbd4f0f4/attachment.bin