[Xorp-users] xorp_rtrmgr won't start without interface connection
Dioscoro Barte
dbarte at infoweapons.com
Thu Apr 12 05:16:27 PDT 2007
Hi,
I'm new user of XORP. I've already setup XORP 1.4 in my box with two (2)
interface card. Actually, i've run the application with the example of
config.boot. I'm tried to disconnect one of interface card from switch
then start to run the xorp_rtrmgr but it won't run if one of my card
have no carrier.
Can I ask what's an explanation why it won't run without connection in
any of interface card?
Thank you and more power!
Roy
P.S. Here's the log and status of ifconfig below.
mcast# ifconfig
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 172.100.0.2 netmask 0xffff0000 broadcast 172.100.255.255
ether 00:19:5b:2f:14:6a
media: Ethernet autoselect (100baseTX <full-duplex,flag0,flag1>)
status: active
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.50.1 netmask 0xffffff00 broadcast 192.168.50.255
ether 00:15:f2:3d:ac:91
media: Ethernet autoselect (none)
status: no carrier
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
/Note: Status of vr0 is no carrier or no connection from lan.
-----------------------------------------------------------------------------
/mcast# /usr/local/xorp/bin/xorp_rtrmgr
[ 2007/04/12 19:39:53 INFO xorp_fea MFEA ] MFEA enabled
[ 2007/04/12 19:39:53 INFO xorp_fea MFEA ] CLI enabled
[ 2007/04/12 19:39:53 INFO xorp_fea MFEA ] CLI started
[ 2007/04/12 19:39:53 INFO xorp_fea MFEA ] MFEA enabled
[ 2007/04/12 19:39:53 INFO xorp_fea MFEA ] CLI enabled
[ 2007/04/12 19:39:53 INFO xorp_fea MFEA ] CLI started
[ 2007/04/12 19:40:01 INFO xorp_fea MFEA ] Interface added: Vif[sk0]
pif_index: 1 vif_index: 0 addr: 172.100.0.2 subnet: 172.100.0.0/16
broadcast: 172.100.255.255 peer: 0.0.0.0 Flags: MULTICAST BROADCAST
UNDERLYING_VIF_UP MTU: 1500
[ 2007/04/12 19:40:01 INFO xorp_fea MFEA ] Interface added: Vif[vr0]
pif_index: 2 vif_index: 1 addr: 192.168.50.1 subnet: 192.168.50.0/24
broadcast: 192.168.50.255 peer: 0.0.0.0 Flags: MULTICAST BROADCAST MTU: 1500
[ 2007/04/12 19:40:01 INFO xorp_fea MFEA ] MFEA started
[ 2007/04/12 19:40:02 INFO xorp_fea MFEA ] Interface enabled Vif[sk0]
pif_index: 1 vif_index: 0 addr: 172.100.0.2 subnet: 172.100.0.0/16
broadcast: 172.100.255.255 peer: 0.0.0.0 Flags: MULTICAST BROADCAST
UNDERLYING_VIF_UP MTU: 1500 DOWN IPv4 ENABLED
[ 2007/04/12 19:40:02 INFO xorp_fea MFEA ] Interface started: Vif[sk0]
pif_index: 1 vif_index: 0 addr: 172.100.0.2 subnet: 172.100.0.0/16
broadcast: 172.100.255.255 peer: 0.0.0.0 Flags: MULTICAST BROADCAST
UNDERLYING_VIF_UP MTU: 1500 UP IPv4 ENABLED
[ 2007/04/12 19:40:02 INFO xorp_fea MFEA ] Interface added:
Vif[register_vif] pif_index: 1 vif_index: 2 addr: 172.100.0.2 subnet:
172.100.0.2/32 broadcast: 172.100.0.2 peer: 0.0.0.0 Flags: PIM_REGISTER
UNDERLYING_VIF_UP MTU: 1500
[ 2007/04/12 19:40:02 INFO xorp_fea MFEA ] Interface enabled Vif[vr0]
pif_index: 2 vif_index: 1 addr: 192.168.50.1 subnet: 192.168.50.0/24
broadcast: 192.168.50.255 peer: 0.0.0.0 Flags: MULTICAST BROADCAST MTU:
1500 DOWN IPv4 ENABLED
[ 2007/04/12 19:40:02 ERROR xorp_fea:1162 MFEA +914 mfea_node.cc
start_vif ] Cannot start vif vr0: underlying vif is not UP
[ 2007/04/12 19:40:02 WARNING xorp_fea XrlMfeaTarget ] Handling method
for mfea/0.1/start_vif failed: XrlCmdError 102 Command failed Cannot
start vif vr0: underlying vif is not UP
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3257 bytes
Desc: S/MIME Cryptographic Signature
Url : http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20070412/770d8c73/attachment.bin
More information about the Xorp-users
mailing list