[Xorp-users] Question on supporting multiple routing tables.

[Ben Greear]

I finally found time to work on this, and it seems like I am making
some good progress!

I'm using the cvs snapshot from back when you added the custom
routing-table support, and have not patched the code at all to date.

I see OSPF HELLO messages on the links between my routers,
and it seems the routing tables are set up mostly correct.

However, I'm still missing something..probably a config file issue.

Assume I have:
  R1 with eth0, eth1
  R2 with eth2, eth3

eth1 and eth2 are connected

eth0 and eth3 are connected to simple subnets of PCs (ie, no OSPF routers)

In my case, I don't see routes to get to the eth3 network on R1, though I
do see routes to get to the eth2 subnet.

How do I tell Xorp to treat eth0 and eth3 as subnets and populate routes
properly?

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com