[Xorp-users] Fwd: Re: Help needed for basic PIM-SM configuration
Pavlin Radoslavov
pavlin at icir.org
Mon Jan 15 11:04:56 PST 2007
> I simplified my environment so that I only ha sender S1, two routers R1-R2
> and received C1. Multicast started working with the simplified
> configuration, I have to try again with four routers.
>
> Now "show pim bootstrap" shows:
> Active zones:
> BSR Pri LocalAddress Pri State Timeout SZTimeout
> 172.16.125.100 1 172.16.125.100 1 Elected 30 -1
> 192.168.210.100 1 0.0.0.0 0 AcceptPreferred 121 1291
> Expiring zones:
> BSR Pri LocalAddress Pri State Timeout SZTimeout
> Configured zones:
> BSR Pri LocalAddress Pri State Timeout SZTimeout
> 172.16.125.100 1 172.16.125.100 1 Init -1 -1
>
> and "show pim rps" shows:
> RP Type Pri Holdtime Timeout ActiveGroups GroupPrefix
> 172.16.125.100 bootstrap 192 150 -1 1 225.1.1.1/32
> 192.168.210.100 bootstrap 192 -1 -1 0 225.1.1.1/32
>
> Does this look like it should? Those IP addresses are from router R1 and R2.
Yes, this seems correct. After you add more PIM-SM routers
double-check that all routers agree that same IP address is the RP
for group 225.1.1.1.
Regards,
Pavlin
More information about the Xorp-users
mailing list