[Xorp-users] Problems with XORP - seeing error 102 - 102 Command failed Cannot enable vif register_vif: no such vif[edit protocols pimsm4]
Neeraj Prasad
neeraj.prasad at gmail.com
Fri Jan 19 23:36:59 PST 2007
Hello,
First of all thank you to all XORP developer for doing such a great job.
I am a new user of XORP and am using XOPR for some testing. I am using LIVE
CD v1.3 and I am facing certain problems -
1) If I change connection during runtime, i.e. XORP is up and running some
interface goes down showing message 'NO CARRIER'. I need to restart the
system
2) I am not able to add register_vif interface. I have successfully added
the other physical interface for PIMSM4. When I try to add register_vif, it
gives an error saying vif register_vif does not exist. I did following
things serially
What all I did -
- Connected Physical Interfaces
- Restarted PC with XORP Live CD v1.3
- Selected the interfaces during startup
- When system booted up, I configured the interface address and verified
using ping
--- being PASTE ----
dc0/dc0: Flags:<ENABLED,BROADCAST,MULTICAST> mtu 1500
inet 149.11.1.1 subnet 149.11.1.0/24 broadcast 149.11.1.255
physical index 2
ether 00:80:ad:85:1c:b1
fxp0/fxp0: Flags:<ENABLED,BROADCAST,MULTICAST> mtu 1500
inet 192.168.10.149 subnet 192.168.10.0/24 broadcast 192.168.10.255
physical index 4
ether 00:11:25:38:56:d4
lo0/lo0: Flags:<ENABLED,MULTICAST,LOOPBACK> mtu 16384
physical index 9
rl0/rl0: Flags:<ENABLED,BROADCAST,MULTICAST> mtu 1500
inet 149.10.1.1 subnet 149.10.1.0/24 broadcast 149.10.1.255
physical index 1
ether 00:00:a1:32:3b:fc
vr0/vr0: Flags:<ENABLED,BROADCAST,MULTICAST> mtu 1500
inet 149.12.1.1 subnet 149.12.1.0/24 broadcast 149.12.1.255
physical index 3
ether 00:80:c8:03:87:36
----end PASTE---------------
- Enabled PIM routing process (set protocols pimsm4)
- Added interface name to the pimsm4
--------------begin PASTE----------------------
xorp at LiveCD> show pim interface
Interface State Mode V PIMstate Priority DRaddr Neighbors
dc0 UP Sparse 2 DR 1 149.11.1.1 0
fxp0 DISABLED Sparse 2 DR 1 192.168.10.149 0
lo0 DISABLED Sparse 2 NotDR 1 0.0.0.0 0
rl0 UP Sparse 2 DR 1 149.10.1.1 0
vr0 UP Sparse 2 DR 1 149.12.1.1 0
xorp at LiveCD>
------------------end PASTE------------------------
- Now when I add special register_vif I get an error
------------------------being
PASTE---------------------------------------------
xorp at LiveCD> configure
Entering configuration mode.
There are no other users in configuration mode.
[edit]
xorp at LiveCD# edit protocols pimsm4
[edit protocols pimsm4]
xorp at LiveCD# set interface regs
Possible completions:
<text> Configure IPv4 PIM-SM on a network interface
xorp at LiveCD# set interface register_vif vif register_vif
[edit protocols pimsm4]
xorp at LiveCD# commit
Commit Failed
102 Command failed Cannot enable vif register_vif: no such vif[edit
protocols pimsm4]
xorp at LiveCD#
------------------------end
PASTE---------------------------------------------
And since it is mandatory to have the special vif installed, PIM is not
working. Can someone guide me how to do it
--
Thanks and Regards,
Neeraj Prasad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20070120/ab2787dd/attachment.html
More information about the Xorp-users
mailing list