[Xorp-users] doubt in Test suite !!!!

[Pavlin Radoslavov]

>          according to test Pim suite pdf (available @ xorp's website )Basic
> interoperability test setup is
> 
> TN1 ---------------------------- RUT ----------------- TR1
> ---------------------------- TN2
> 
> please tell following ip & mask are correct :
> 
> TN1 ip 10.0.0.2 Mask 255.255.255.0
> 
> RUP eth0 10.0.0.1  Mask  <http://255.255.255.0/>255.255.255.0   eth1
> 30.0.0.1 mask 255.0.0.0
> 
> TR1  eth0 30.0.0.2 mask 255.0.0.0 eth1 192.168.0.1 mask 255.255.255.0
> 
> TN2 192.168.0.2 mask 255.255.255.0
> 
> 
> We have problem to decide  ip address of link between RUT & TR1 !! so please
> tell us that ip address & masks mentioned above are right or not ?? Will
> those ip address work for all tests mentioned in Test suite ?? if not please
> suggest changes or new ips & masks to be used !!

Yes, those values should work.

In general, you can use any addressing on each of the subnets as
long as they are valid (e.g., each interface has unique IP address,
the subnet addresses are not overlapping, etc).

Regards,
Pavlin

> Thank you,
> Ashish
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users