[Xorp-users] xorp RIPng
Pavlin Radoslavov
pavlin at icir.org
Wed Nov 21 02:40:04 PST 2007
> > What is the output of the "show route table ipv6 unicast ripng"
> > xorpsh command?
>
>
> admin at demo_rtr.infoweapons.com> show route table ipv6 unicast ripng
> 2001:ec0:4000:beef::/64 [rip(120)/1]
> > to fe80::213:d4ff:fed8:6808 via sk0/sk0
> 2001:ec1:4001:10af::/64 [rip(120)/1]
> > to fe80::213:d4ff:fed8:6808 via sk0/sk0
>
> This status output was taken from Router 2. Link-local address
> fe80::213:d4ff:fed8:6808 is the vr0 interface of Router1. So I believe
> it should be vr0 instead of the one shown above.
>
> Output of show route table ipv6 unicast ripng from Router 1:
>
> admin at demo_rtr.infoweapons.com> show route table ipv6 unicast ripng
> 2001:ec2:4002:fa11::/64 [rip(120)/1]
> > to fe80::215:f2ff:fe3d:ac91 via sk0/sk0
>
>
> Thanks,
> Hansi
> >
> > I believe I have found the problem (RIPng doesn't send the interface
> > information along with the route it sends to the RIB so the RIB
> > mis-calculates the outgoing interface), but I'd like to cross-check
> > this with the "show route" output.
Thank you for the info.
I just committed a fix to CVS. Please let me know whether the latest
code fixes the problem for you.
Thanks,
Pavlin
More information about the Xorp-users
mailing list