[Xorp-users] Unable to configure RIP on XORP??

[sanjeev kumar]

Ignoring non-text/plain MIME parts

- Unprocessed:
      Please go through the following configuration:
      PC1(with XORP)  eth0 : 172.16.10.8 255.255.0.0
      eth0:0(Virtual Interface):192.168.0.1 255.255.255.0
    PC2(with
      XORP)  eth0 : 172.16.10.9 255.255.0.0
      eth0:0(Virtual Interface):10.0.0.1 255.255.255.0
         Virtual
      Interface(eth0:0)------PC1----
   ----------------------PC2-----------------Virtual
      Interface(eth0:0)
              (192.168.0.1)            (172.16.0.8)          (172.16.0.9)
      (10.0.0.1)
      This is my PC confguration:
           rip {
                  interface eth0
   - Ignored:
                  interface "eth0:0"
              }
          }
          policy {
              policy-statement connected {
                  term export {

- Ignored:
- Show quoted text -
                      from {
                          protocol: "connected"
                      }
                  }
              }
          }
          interfaces {
              restore-original-config-on-shutdown: false
              interface eth0 {
                  disable: false
                  discard: false
                  description: ""
                  vif eth0 {
                      disable: false
                  }
                  default-system-config {
                  }
              }
          }

      Same configuration on the second PC.Please guide me how to enable
   RIP(step
      by step if possible).How to advertise the different networks in
   RIP(XORP)..I
      had worked on Cisco router ,now trying to configure XORP.

      Thanks & Regards,
      Sanjeev


   --
   Efforts may fail,But don't Fail to make efforts.
   ---------
   Sanjeev Kumar
   Project Engineer
   CDAC(Formerly NCST)
   Juhu,Mumbai-400049

- Done.



---------- Forwarded message ----------
From: "sanjeev kumar" <ror.sanjeev at gmail.com>
To: xorp-users-request at xorp.org
Date: Tue, 9 Oct 2007 18:57:37 +0530
Subject: Unable to configure RIP on XORP??
 I am new to XORP.I was unable to configure RIP at XORP
   Please go through the following configuration:
   PC1(with XORP)  eth0 : 172.16.10.8 255.255.0.0
   eth0:0(Virtual Interface): 192.168.0.1 255.255.255.0

 PC2(with
   XORP)  eth0 : 172.16.10.9 255.255.0.0
   eth0:0(Virtual Interface):10.0.0.1 255.255.255.0
      Virtual
   Interface(eth0:0)------PC1----
----------------------PC2-----------------Virtual
   Interface(eth0:0)
           ( 192.168.0.1)            (172.16.0.8)          ( 172.16.0.9)
   (10.0.0.1)
   This is my PC confguration:
        rip {
               interface eth0

- Ignored:
               interface "eth0:0"
           }
       }
       policy {
           policy-statement connected {
               term export {
                   from {
                       protocol: "connected"
                   }
               }
           }
       }
       interfaces {
           restore-original-config-on-shutdown: false
           interface eth0 {
               disable: false
               discard: false
               description: ""
               vif eth0 {
                   disable: false
               }
               default-system-config {
               }
           }
       }

   Same configuration on the second PC.Please guide me how to enable
RIP(step
   by step if possible).How to advertise the different networks in
RIP(XORP)..I
   had worked on Cisco router ,now trying to configure XORP.

   Thanks & Regards,
   Sanjeev


-- 
Efforts may fail,But don't Fail to make efforts.
---------
Sanjeev Kumar
Project Engineer
CDAC(Formerly NCST)
Juhu,Mumbai-400049
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20071009/7b6c5612/attachment.html