[Xorp-users] "Make All" error

Pavlin Radoslavov pavlin at icir.org
Wed Oct 31 20:58:52 PDT 2007


HJ <hengjuen at gmail.com> wrote:

> Hi Pavlin,
> Here is what i tried, and still seeing error message.
> I am running on Fedora 6.

It seems that somehow your ./configure has been corrupted after
running "make all" which is very odd.

Could you send me a copy of your ./configure before and after you
run "make all".
Also, what is the version of "make" you are using (i.e., the output
of "make -v").

Thanks,
Pavlin

> 
>    1. make clean
>    2. tar √zxvf xorp-1.4.tar.gz
>    3. ./configure
>    4. make (ok with no error)
>    5. make all (just to verify the issue, same error on line 1921)
>    6. make (to verify anything wrong with *make all *command, same error
>    on line 1921 happen)
>    7. make clean
>    8. ./configure (same error on line 1921)
>    9. make (same error on line 1921)
>    10. make all (same error on line 1921)
>    11. make clean
>    12. tar √zxvf xorp-1.4.tar.gz
>    13. ./configure (ok)
>    14. make all (ok with no error)
>    15. make (ok)
>    16. *make √B (according to man help page,  it is for unconditionally
>    make all targets)*
> 
> -        *configure.in:53: error: possibly undefined macro: AM_INIT_AUTOMAKE
> *
> 
> -        *same for :54: AM_CONFIG_HEADER*
> 
> -        *:55: AM_MAINTAINER_MODE*
> 
> -        *:168: AC_DISABLE_SHARE*
> 
> -        *:169: AC_DISABLE_FAST_INSTALL*
> 
> -        *:170: AC_LIBTOOL_WIN32_DLL*
> 
> -        *:171: AC_PROG_LIBTOOL*
> 
> -        *:270: AM_CONDITIONAL*
> 
> -        *Make: *** [configure] Error 1*
> 
>    1. make all (error on line 1921 above)
>    2. make √B (error on line 1921 above)
>    3. make (error on line 1921 above)
> 
> Please help to advice.
> Thanks.
> REgards,
> HJ
> 
> 
> On 11/1/07, Pavlin Radoslavov <pavlin at icir.org> wrote:
> >
> > > I am trying to recompile the XORP after 1st sucessfuly compilation and
> > > verification using GCC.
> > > I did such steps as mention in user guide:
> > > 1) ./configure
> > > 2) make
> > > 3) make check
> > > After these steps, i try to recompile all the target with:
> > > - make all
> > > it shows error here:
> > >
> > > ./configure: line 1921: syntax error near unexpected token 'xorp,'
> > >
> > > ./configure: line 1921: 'AM_INIT_AUTOMAKE(xorp, 1.4)'
> > >
> > > Make: *** [config.status] Error 2
> > >
> > > Can anyone help to provide some input here?
> >
> > That's odd.
> > First, "make" itself is suppose to compile all targets (except the
> > test programs) so you don't really need "make all".
> > Also, if you compiled everything, then "make all" should be a no-op.
> > It looks like something got corrupted.
> > Can you start with a clean XORP tree (untar from scratch) and see
> > whether you get same problem.
> >
> > I assume that you are running Linux, otherwise on BSD boxes you
> > should use "gmake" instead of "make".
> >
> > Regards,
> > Pavlin
> >
> >
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users



More information about the Xorp-users mailing list