[Xorp-users] OSPF Areas and Linux Route table

[Sukrit Dasgupta]

Hi list,

I have a pretty simple setup of 3 areas using OSPF:


12.0.0.0 (Area1: XORP on Linux)<---------->14.0.0.0 (Area 0: Cisco  
7200 Testbed) <-----------------> 16.0.0.0 (Area 2: XORP on linux)

The XORP border routers in Area 1 and Area 2 can ping the Cisco ABR  
routers, but thats about it. The linux route table shows that only an  
entry for the corresponding area. So for example, $route -e on the  
XORP with router with IP 12.0.11.2 connected to the Cisco 7200 with  
IP 12.0.11.3 only shows

Destination     Gateway         Genmask         Flags   MSS Window   
irtt Iface
12.0.11.0       *               255.255.255.0   U         0  
0          0 eth1

No OSPF area information is being shared amongst the routers.

Any ideas?

Thanks in advance
Sukrit