[Xorp-users] [xorp-users] OSPFv2 problem: no matching neighbor found
Yue Li
yueli.m at gmail.com
Sat Jan 5 22:54:06 PST 2008
---------- Forwarded message ----------
From: Yue Li <yueli.m at gmail.com>
Date: 2008-1-6 上午1:51
Subject: Re: [Xorp-users] [xorp-users] OSPFv2 problem: no matching
neighbor found
To: atanu at icsi.berkeley.edu
Hi,
Thanks for your reply.
The topology used is as follow:
+---+ (10.10.0.9) (10.10.0.10)+---+
| A |----------------------------------------- | B |
+---+ +---+
|(10.10.0.1) | (10.10.0.6)
| |
| | (10.10.0.5)
| (10.10.0.2) +----+
- --------------------------------------------| C |
+----+
Router A (id: 10.10.0.1), Router B (id: 10.10.0.10) and Router C (id:
10.10.0.5),
each has two neighbors.
On Router A:
show ospf4 neighbor:
Address Interface State ID Pri Dead
10.10.0.2 tun0/tun0 ExStart 10.10.0.5 128 31
10.10.0.10 tun1/tun1 ExStart 10.10.0.10 128 33
show ospf4 database:
OSPF link state database, Area 0.0.0.0
Type ID Adv Rtr Seq Age Opt Cksum Len
Router *10.10.0.1 10.10.0.1 0x80000001 78 0x2 0xad78 48
2008/1/4, Atanu Ghosh <atanu at icsi.berkeley.edu>:
> Hi,
>
> The XORP OSPF will not accept data description packets from an unknown
> neighbour (this is a protocol requirement).
>
> Can you send the output of the "show ospf4 neighbor" command?
>
> Atanu.
> .
> >>>>> "Yue" == Yue Li <yueli.m at gmail.com> writes:
>
> Yue> Hi, everyone I am doing some experiment with ospfv2. The
> Yue> problem is xorp is keep saying "no matching neighbor found"
> Yue> when receiving database description packets. When I show ospf
> Yue> database through xorpsh, there is nothing.
>
> Yue> Can you give me any clues? Thanks!
>
> Yue> _______________________________________________ Xorp-users
> Yue> mailing list Xorp-users at xorp.org
> Yue> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
>
More information about the Xorp-users
mailing list