[Xorp-users] Cannot start xorp_rtrmgr

[Pavlin Radoslavov]

Swati Sinha Deb <Swati.Deb at bristol.ac.uk> wrote:

> Hi Pavlin,
> 
> I don't need IPv6 so I can ignore those messages. I am using click-1.4.3. 
> Are there any issues with older version of click and xorp-1.4?

Click-1.4.3 should be OK.
Actually, there could be issues with newer versions of Click, but
this is not verified/tested.

Regards,
Pavlin

> Thanks for your help.
> 
> Regards,
> Swati
> 
> --On 14 May 2008 17:28 -0700 Pavlin Radoslavov <pavlin at ICSI.Berkeley.EDU> 
> wrote:
> 
> > Swati Sinha Deb <Swati.Deb at bristol.ac.uk> wrote:
> >
> >> Hi Pavlin,
> >>
> >> Many thanks for the reply. Apparently the server did not support the
> >> IPv6.  Once enabled I could install the XORP-1.4 successfully. But now I
> >> am  getting Click related errors. Please advice.
> >
> > Please send your XORP configuration and the Click version you are
> > using.
> >
> > It appears that you are trying to use Click with IPv6.
> > The default Click config generator
> > (xorp/fea/xorp_fea_click_config_generator) has IPv6 disabled by
> > default. To enable it, edit that file and change "enable_ipv6 = 0"
> > to "enable_ipv6 = 1".
> >
> > If you don't need IPv6, then I think you can just ignore those
> > IPv6-related error messages.
> >
> > Regards,
> > Pavlin
> >
> >
> >>> Xorp-users mailing list
> >> Xorp-users at xorp.org
> >> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
> 
> 
> 
> 
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users