[Xorp-users] xorp clearing routing table upon startup

[Stegen Smith]

Also an interesting thing to note is that if a routing entry is added manually, I see the following happening:

[ 2008/10/09 16:31:35  ERROR xorp_fea:15980 XRL +379 xrl_pf_stcp.cc die ] STCPRequestHandler died: life timer expired
[ 2008/10/09 16:31:35  ERROR xorp_fea:15980 XRL +379 xrl_pf_stcp.cc die ] STCPRequestHandler died: life timer expired

And also, I forgot to give the following information... I'm using the latest xorp build from cvs, and this is openbsd 4.3.

thanks!
stegen
Stegen Smith wrote:
> Hello again group!
> 
> So I've got another question regarding xorp clearing the routing table on the system while starting up.
> I'm guessing that is the default behavior, but I was wondering if it could be disabled/modified.  Here's the situation
> that I'm seeing.  I've got openbgpd setup on my router, and have yet to configure bgp in xorp  (unsure if I want to
> stick with openbgp or use xorp... I'm vacillating... but maybe this will force my hand!).
> 
> So, openbgpd obviously inserts its routes into the routing table:
> root1p2at-ig1.sv~ netstat -nr|grep 10.3.48
> 10.3.48/20         10.3.14.39         UG1         0        0      -   vlan290
> 
> I then startup xorp and:
> root1p2at-ig1.sv~ netstat -nr|grep 10.3.48
> root1p2at-ig1.sv~
> 
> So is there any chance that I would be able to get them to play nicely, or is it a pipe dream?  I guess that'd be a push to get everything into xorp ;)
> 
> Here's my configuration if that helps:
> 
> interfaces {
>     restore-original-config-on-shutdown: false
>     interface vlan41 {
>         description: "data interface"
>         disable: false
>         default-system-config
>     }
> }
> 
> fea {
>     unicast-forwarding4 {
>         disable: false
>     }
> }
> 
> plumbing {
>     mfea4 {
>         disable: false
>         interface vlan41 {
>             vif vlan41 {
>                 disable: false
>             }
>         }
>         interface register_vif {
>             vif register_vif {
>                 disable: false
>             }
>         }
>     }
> }
> 
> protocols {
>     igmp {
>         disable: false
>         interface vlan41 {
>             vif vlan41 {
>                 disable: false
>                 version: 2
>                 enable-ip-router-alert-option-check: false
>                 query-interval: 60
>                 query-last-member-interval: 1
>                 query-response-interval: 10
>                 robust-count: 2
>             }
>         }
>     }
> 
>     pimsm4 {
>         disable: false
>         interface vlan41 {
>             vif vlan41 {
>                 disable: false
>                 dr-priority: 1
>                 hello-period: 30
>                 hello-triggered-delay: 5
>             }
>         }
>         interface register_vif {
>             vif register_vif {
>                 disable: false
>             }
>         }
> /*
>         bootstrap {
>             disable: false
>             cand-bsr {
>                 scope-zone 224.0.0.0/4 {
>                     is-scope-zone: false
>                     cand-bsr-by-vif-name: "vlan41"
>                     cand-bsr-by-vif-addr: 10.3.96.2
>                     bsr-priority: 1
>                     hash-mask-len: 30
>                 }
>             }
>         }
> */
>         /* Note: static-rps and bootstrap should not be mixed */
>         static-rps {
>             rp 10.3.96.2 {
>                 group-prefix 224.0.0.0/4 {
>                 }
>             }
>         }
> 
>         switch-to-spt-threshold {
>             /* approx. 1K bytes/s (10Kbps) threshold */
>             disable: false
>             interval: 100
>             bytes: 102400
>         }
> 
>     }
> 
>     fib2mrib {
>         disable: false
>     }
> }
> 
> Thanks for the help, and I apologize in advance if this is too much =)
> 
> stegen
> 
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
>