[Xorp-users] virtual link

[Nithya Chandrakesan]

Hi Tom,

Could you provide us your config? Also let us know which version of XORP you
were trying.

Thanks,
Nithya.

On Thu, Apr 30, 2009 at 1:13 AM, Tomek <segv at o2.pl> wrote:

> Hi,
>
> I've got a problem with xorp configuration.
> Actually in my case situation looks like this:
>
> R3 <-> R5 <-> R4 <-> R6
>
> where:
>
> R3 is an ABR of area 0 (left side) and area 1 (right side)
> R5 is internal of area 1
> R4 is ABR of area 1(left side) and area 3 (right side)
> R6 internal of area 3
>
> everything works fine until i want to configure virtual link between R3 and
> R4
> I added virtual-link section to area 0.0.0.0 in ospf4 section
>
>                area 0.0.0.0 {
>                        virtual-link 192.168.0.40 {
>                                transit-area: 0.0.0.1
>                        }
>                       ....
> and tried to add virtual-link to R4 without succeed because of error:
> Command failed Virtual link must be in area 0.0.0.0
>
> my question is how to configure virtual link at R4 ?
>
> R3 reports something like this
>
> root at r3> show ospf4 neighbor
>  Address         Interface             State      ID              Pri  Dead
> 192.168.6.50     eth3/eth3              Full      192.168.0.50     128
>  33
> 192.168.5.40     vlink/192.168.0.40     Init      192.168.0.40       0
> 0
> ....
>
> Please help, It is very important for me!
> Thank you
>
> Best regards,
> Tom
>
>
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users<http://mailman.icsi.berkeley.edu/mailman/listinfo/xorp-users>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20090430/54bde79e/attachment.html