[Xorp-users] Booting error.

Pavlin Radoslavov pavlin at ICSI.Berkeley.EDU
Thu Feb 26 16:05:39 PST 2009


Ganesh,

Please have a look in the xorp/rtrmgr/config/multicast4.boot sample
configuration file. It has the basic setup you need to enable
multicast routing, but obviously you need to edit that file before
starting XORP: the interface names, the IP addresses, and the static
RPs info.
If you are not sure about some of the configuration options please
check with the XORP User Manual: Chapter 14 for IGMP and Chapter 15
for PIM-SM.

Also, you must enable multicast routing in your kernel.
Please see Section 15.3 for the Linux-specific kernel configuration
options.

Hope that helps,
Pavlin


Ganesh kumar <ganeshamutha at gmail.com> wrote:

> Hi Nithya and Tom,
> 
> Thank you very much for your reply,
> 
> I was created some configuration by running oxrp_rtrmgr -N  and xorpsh in
> another terminal.
> 
> i managed to create Multicast IGMPv3 in my network interface. (it was
> detected only one interface but i am having two NIC though i added one more
> interface  manually).
> 
> Using show -all i got information of configuration. i just simply copied
> those details and pasted in myboot.config i attached those detail with you.
> 
> when i rebooted with (-b myboot.config) i got only the error message.
> 
> My Linux Kernel : 2.6.21-1.3194.fc7
> 
> My needs are:
> 
> *)  Need to create IPv4 and IPv6 mutlicast (SSM, ASM) router.  If you
> provide direct solution with XORP it would be much much much helpful.
> 
> I am expecting your helpful reply.
> 
> Thanks very much in advance.
> 
> Regards,
> Ganesh
> 
> 
> 2009/2/26 Nithya Chandrakesan <nithya.chandrakesan at xorp.net>
> 
> > Hi Ganesh,
> >
> > Could you please send us the config file that you were using to bring up
> > xorp_rtrmgr?
> >
> > Sample config.boot files are available in xorp/rtrmgr/config directory. You
> > need to modify the config files, as per the interface you are using.
> > We will be able to narrow down the issue, by looking at the config file you
> > are using.
> > Also provide us the OS and kernel version.
> >
> > Thanks,
> > Nithya.
> >
> >
> >
> > On Wed, Feb 25, 2009 at 6:30 AM, Ganesh kumar <ganeshamutha at gmail.com>wrote:
> >
> >> Hi All,
> >>
> >> I am very new to XORP. I have downloaded latest 1.6 but i could able to
> >> compile successfully but i could not run.
> >>
> >> I created configure file by "-N" mode I took copy of the configuration and
> >> i restarted xorp_rtrmgr with -b "saved_boot_file"  but i was getting
> >> following error and i not able to start the xorp_rtrmgr successfully. I was
> >> getting following error.
> >>
> >> Could any one of you please help me to resolve this issue.. Please.
> >>
> >>
> >>
> >>  ./xorp_rtrmgr -b myboot.config
> >> [ 2009/02/25 19:31:35  INFO xorp_rtrmgr:6446 RTRMGR +249
> >> master_conf_tree.cc execute ] Changed modules: interfaces, firewall, fea,
> >> mfea4, rib, fib2mrib, igmp, pimsm4
> >> [ 2009/02/25 19:31:35  INFO xorp_rtrmgr:6446 RTRMGR +101 module_manager.cc
> >> execute ] Executing module: interfaces (fea/xorp_fea)
> >> [ 2009/02/25 19:31:36 INFO xorp_fea MFEA ] MFEA enabled
> >> [ 2009/02/25 19:31:36 INFO xorp_fea MFEA ] CLI enabled
> >> [ 2009/02/25 19:31:36 INFO xorp_fea MFEA ] CLI started
> >> [ 2009/02/25 19:31:36 INFO xorp_fea MFEA ] MFEA enabled
> >> [ 2009/02/25 19:31:36 INFO xorp_fea MFEA ] CLI enabled
> >> [ 2009/02/25 19:31:36 INFO xorp_fea MFEA ] CLI started
> >> [ 2009/02/25 19:31:37  ERROR xorp_fea:6447 FEA +207 ifconfig_set.cc
> >> push_config ] Interface error on dc0: interface not recognized
> >> [ 2009/02/25 19:31:37 WARNING xorp_fea XrlFeaTarget ] Handling method for
> >> ifmgr/0.1/commit_transaction failed: XrlCmdError 102 Command failed
> >> Interface error on dc0: interface not recognized
> >> [ 2009/02/25 19:31:37  ERROR xorp_rtrmgr:6446 RTRMGR +691
> >> master_conf_tree.cc commit_pass2_done ] Commit failed: 102 Command failed
> >> Interface error on dc0: interface not recognized
> >> [ 2009/02/25 19:31:37  ERROR xorp_rtrmgr:6446 RTRMGR +261
> >> master_conf_tree.cc config_done ] Configuration failed: 102 Command failed
> >> Interface error on dc0: interface not recognized
> >> [ 2009/02/25 19:31:37  INFO xorp_rtrmgr:6446 RTRMGR +2233 task.cc run_task
> >> ] No more tasks to run
> >> [ 2009/02/25 19:31:37  INFO xorp_rtrmgr:6446 RTRMGR +176 module_manager.cc
> >> terminate ] Terminating module: interfaces
> >> [ 2009/02/25 19:31:37  INFO xorp_rtrmgr:6446 RTRMGR +199 module_manager.cc
> >> terminate ] Killing module: interfaces
> >> [ 2009/02/25 19:31:37  ERROR xorp_rtrmgr:6446 RTRMGR +754
> >> module_manager.cc done_cb ] Command "/opt/xorp-1.6/fea/xorp_fea": terminated
> >> with signal 15.
> >> [ 2009/02/25 19:31:37  INFO xorp_rtrmgr:6446 RTRMGR +287 module_manager.cc
> >> module_exited ] Module killed during shutdown: interfaces
> >>
> >>
> >>
> >>
> >> Regards,
> >> Ganesh
> >>
> >> _______________________________________________
> >> Xorp-users mailing list
> >> Xorp-users at xorp.org
> >> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users<http://mailman.icsi.berkeley.edu/mailman/listinfo/xorp-users>
> >>
> >>
> >
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users



More information about the Xorp-users mailing list