[Xorp-users] BGP settings

[victor omwando]

This is a bit of a misuse of the mailing list, but due to the lack of any faster options, I am obliged to direct my question here. When setting up the bgp protocol peers section, in general (not just limited to XORP configuration), should the local-ip be the same as the BGP ID, or can it be just about any IP address that has been configured on my router? I found the explanation on the xorp manual to be a bit unclear on this point. Thanks.




________________________________
From: Ben Greear <greearb at candelatech.com>
To: Timur Irmatov <irmatov at gmail.com>
Cc: xorp-users at xorp.org
Sent: Friday, July 17, 2009 11:46:14 AM
Subject: Re: [Xorp-users] simple xorp configuration

Timur Irmatov wrote:
>> This sounds similar to stuff other folk ran into, and the workaround was
>> simple, off the top of my head, try the list archives.
>>    
>
> I have tried to search archives but found nothing. By the way, I tried
> to install XORP 1.6 on fresh stable Debian lenny system, I have the
> same problem with creation of vlans through xorp. I could create them
> outside of xorp for now. Did anyone had success with creating vlans on
> Linux through xorp, not through system networking scripts?
>  
I create them outside of xorp, and that works, at least.

Ben


-- 
Ben Greear <greearb at candelatech.com> 
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
Xorp-users mailing list
Xorp-users at xorp.org
http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20090719/0da13275/attachment.html