[Xorp-users] Can't enable MFEA
Bruce Simpson
bms at incunabulum.net
Mon Oct 19 08:48:46 PDT 2009
Jorn Rikkers wrote:
> ...
> PIM-SM:
> - If the kernel does not support PIM-SM, or if PIM-SM is not enabled in the kernel, then running PIM-SM will fail with the following error message:
> [ 2004/06/12 10:26:41 ERROR xorp_fea:444 MFEA +529 mfea_mrouter.cc start_mrt ] setsockopt(MRT_INIT, 1) failed: Operation not supported
>
The appropriate PIM hooks should be enabled automatically in FreeBSD
kernel compiles since at least FreeBSD 4.6, however, MROUTING itself may
not be enabled.
A failure with MRT_INIT usually suggests that the kernel was compiled
without multicast forwarding support, or it was not loaded as a kernel
module; please refer to my other reply.
thanks,
BMS
More information about the Xorp-users
mailing list