[Xorp-users] Problem with Multicast ipv4 forwarding setup
dave jones
s.dave.jones at gmail.com
Wed Dec 22 02:45:46 PST 2010
All right, the problem solved! The configuration is right, there's
something wrong
with my iptv device...
On Mon, Dec 20, 2010 at 1:43 PM, dave jones wrote:
> Hi,
>
> I'm trying to run XORP-1.6(from ports/net/xorp) in a multicast IPv4
> scenario using FreeBSD 9.0 -current. I have the following networks:
>
> -----------------------------------------------
> | |
> | |
> iptv device (172.16.113.2) FreeBSD (re0:172.16.113.8)
> | (re1:192.168.1.1)
> |
> PCs
>
> The problem is when I run "netstat -g", it shows:
> IPv4 Virtual Interface Table
> Vif Thresh Local-Address Remote-Address Pkts-In Pkts-Out
> 0 1 192.168.1.1 0 0
> 1 1 172.16.113.8 0 0
> 2 1 192.168.1.1 0 0
>
> Ipv4 Multicast Forwarding Table is empty
>
> Here's my xorp.conf:
>
> interfaces {
> interface re0 {
> description: "downstream interface"
> disable: false
> default-system-config
> }
> interface re1 {
> description: "upstream interface"
> disable: false
> default-system-config
> }
> }
>
> fea {
> unicast-forwarding4 {
> disable: false
> }
> }
> plumbing {
> mfea4 {
> interface re0 {
> vif re0 {
> disable: false
> }
> }
> interface re1 {
> vif re1 {
> disable: false
> }
> }
> interface register_vif {
> vif register_vif {
> /* Note: this vif should be always enabled */
> disable: false
> }
> }
> }
> }
> protocols {
> igmp {
> interface re0 {
> vif re0 {
> disable: false
> }
> }
> interface re1 {
> vif re1 {
> disable: false
> }
> }
> }
> }
> protocols {
> pimsm4 {
> interface re0 {
> vif re0 {
> disable: false
> }
> }
> interface re1 {
> vif re1 {
> disable: false
> }
> }
> interface register_vif {
> vif register_vif {
> /* Note: this vif should be always enabled */
> disable: false
> }
> }
> }
> }
> protocols {
> fib2mrib {
> disable: false
> }
> }
>
> Regards,
> Dave.
>
More information about the Xorp-users
mailing list