[Xorp-users] PIM-SM first time

[Bernard J Hughes]

I am trying to configure a multicast router.  Xorp has been fine up
until I add protocol pimsm4.  I am using the getting started page from
xorp.org as a reference.  Below is a snippet of errors present in the
log after failing to start the service.  I am only using IPv4 and
therefore only included IPv4 statements in the xorp.conf file.  Any
ideas on why it might be failing?  Thanks in advance!


[ 2010/02/15 13:34:40 INFO xorp_mld MLD6IGMP ] Interface added: Vif[em0]
pif_index: 1 vif_index: 0 Flags: MULTICAST BROADCAST UNDERLYING_VIF_UP
MTU: 1500
[ 2010/02/15 13:34:40 INFO xorp_mld MLD6IGMP ] Interface added:
Vif[gre0] pif_index: 5 vif_index: 1 Flags: P2P MULTICAST
UNDERLYING_VIF_UP MTU: 1476
[ 2010/02/15 13:34:40 INFO xorp_mld MLD6IGMP ] Interface added: Vif[rl0]
pif_index: 2 vif_index: 2 Flags: MULTICAST BROADCAST UNDERLYING_VIF_UP
MTU: 1500
[ 2010/02/15 13:34:41 INFO xorp_mld MLD6IGMP ] Interface enabled:
Vif[rl0] pif_index: 2 vif_index: 2 Flags: MULTICAST BROADCAST
UNDERLYING_VIF_UP MTU: 1500 DOWN IPv6 ENABLED
[ 2010/02/15 13:34:41  ERROR xorp_mld:11792 MLD6IGMP +1095
mld6igmp_node.cc start_vif ] Cannot start vif rl0: invalid primary
address
[ 2010/02/15 13:34:41 WARNING xorp_mld XrlMld6igmpTarget ] Handling
method for mld6igmp/0.1/start_vif failed: XrlCmdError 102 Command failed
Cannot start vif rl0: invalid primary address
[ 2010/02/15 13:34:41  ERROR xorp_rtrmgr:11728 RTRMGR +691
master_conf_tree.cc commit_pass2_done ] Commit failed: 102 Command
failed Cannot start vif rl0: invalid primary address
[ 2010/02/15 13:34:41  ERROR xorp_rtrmgr:11728 RTRMGR +261
master_conf_tree.cc config_done ] Configuration failed: 102 Command
failed Cannot start vif rl0: invalid primary address
[ 2010/02/15 13:34:41  INFO xorp_rtrmgr:11728 RTRMGR +2233 task.cc
run_task ] No more tasks to run