[Xorp-users] Question on XORP PIM-SSM Configuration
조성균
skjo at etri.re.kr
Thu Jul 29 19:20:29 PDT 2010
Hi,
I’m new to XORP and now configuring simple PIM-SSM test scenario with two
XORP routers and VLC server/client.
Detailed configuration information is as below.
Multicast Server
192.168.96.49 / 24
Window XP SP3
VLC Server
Router #1
eth0: 192.169.96.50 / 24
eth1: 10.3.2.18 / 16
Fedora Core 9 / 2.6.25-14
Manually configured
as RP
Router #2
eth0: 10.3.2.20 / 16
eth1: 192.168.97.50 / 24
Multicast Client
192.168.97.49 / 24
Fedora Core 10 / 2.7.41
VLC Client
When I start to run xorp with boot configuration (see attached files), I
can check Wiresharks and each router sends ‘PIM Hello’ message.
However they can’t update their neighbor table.
Xorp> show pim neighbors
Interface DRpriority NeighborAddr V Mode Holdtime Timeout
Do I need to configure more additional information or pre-configuration?
(I read some articles about PIM-SSM posted on xorp-user group and tried it.
But it couldn’t help)
Please let us know how it goes.
Sincerely yours,
S. K. Jo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20100730/9743356c/attachment.html
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: config(R1).txt
Url: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20100730/9743356c/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: config(R2).txt
Url: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20100730/9743356c/attachment-0001.txt
More information about the Xorp-users
mailing list