[Xorp-users] one more issue with ospf and network topology

[Ben Greear]

On 06/13/2010 11:39 AM, Stevan Grbić 05/0486 wrote:
> Hi,
> I'm trying to configure basic network topology like A=B=C=D(=E) using
> OSPF4. My config of routers is posted down. (using VirtualBox and and NIC
> set to internal network, to  separate traffic from outside world, and to
> make more realistic scenario-like 3 (4 and 5) routers connected in
> cascade). I'm  pinging routers to check for availability, as well as route
> advertising.

> Router A: eth0-1.1.1.2  area:1.1.1.0 | router-id: 1.1.1.2
> Router C: eth0-2.2.2.3  area:2.2.2.0 | eth1-3.3.3.2  area:3.3.3.0 |
> router-id 3.0.0.0
> Router D: eth0-3.3.3.3  area:3.3.3.0 | eth1-4.4.4.2  area:4.4.4.0 |
> router-id 4.0.0.0
> etc.
>
> If someone can point me on mistake, or suggest me some other solution for
> this (cascade) scenario (of four and five routers).

Does it work if you put them all in the same area?

It may take something special to get different areas to share
routes?

Thanks,
Ben


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com