[Xorp-users] OSPF point-to-multipoint issue

[Ben Greear]

On 06/18/2010 10:36 AM, Vincent, Michael - 0665 - MITLL wrote:
> No, the OSPF neighbors do not go to 'FULL', they stay 'DOWN'.  Note that we changed timers, hello/dead = 1/4.  We also did this with the default (10/40) and got the same (non-working) result.

Are your interfaces up (according to Xorp)?

I fixed some problems in OSPF in xorp.ct (a year or so ago) that were related to interfaces
being improperly shown as DOWN in OSPF even though they were really
up.  That said, I think there may still be some races in that area...
I left a lot of debugging in the logs so if that turns out to be the problem,
plz send me the logs and/or investigate them yourself.

Thanks,
Ben

>
>
>      Cheers.
>


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com