[Xorp-users] PIM IGMP troubleshooting

Williams, Mark william at losrios.edu
Fri Mar 5 12:17:37 PST 2010


I just went back and reviewed your configuration from the first post. I think that you need to enable PIM on the em0 interface. I didn't notice that it was not enabled before.

-Mark Williams

-----Original Message-----
From: Bernard J Hughes [mailto:bhughes at totalrecallcorp.com] 
Sent: Friday, March 05, 2010 12:02
To: Williams, Mark; xorp-users at xorp.org
Subject: RE: [Xorp-users] PIM IGMP troubleshooting

Mark, 

I appreciate your assistance in this matter.  I will do what you said,
however I've found some intriguing info in the xorp logs.  Below is the
extent of IGMP related messages.  It looks like all IGMP activity is
strictly prohibited to the vif on em0.  Shouldn't I be seeing membership
reports from 10.9.8.2?  If so this could be the source of my problem.

[ 2010/03/05 14:28:49 TRACE xorp_igmp MLD6IGMP ] TX
IGMP_MEMBERSHIP_QUERY from 10.9.8.1 to 224.0.0.1
[ 2010/03/05 14:28:49 TRACE xorp_igmp MLD6IGMP ] RX
IGMP_MEMBERSHIP_QUERY from 10.9.8.1 to 224.0.0.1 on vif em0
[ 2010/03/05 14:28:50 TRACE xorp_igmp MLD6IGMP ] RX
IGMP_V2_MEMBERSHIP_REPORT from 10.9.8.1 to 224.0.0.22 on vif em0
[ 2010/03/05 14:28:56 TRACE xorp_igmp MLD6IGMP ] RX
IGMP_V2_MEMBERSHIP_REPORT from 10.9.8.1 to 224.0.0.2 on vif em0





More information about the Xorp-users mailing list