[Xorp-users] multicast pimsm4 question
Shaila Jimenez
ladybass at gmail.com
Tue May 25 06:33:27 PDT 2010
Hi all,
When I run xorp 1.6 I always get a message related to pimsm4:
WARNING xorp pimsm4 PIM ] JoinDesired(*,G)=true; RP for group
239.255.255.250: not found.
I read that the multicast address 239.255.255.250 is used the Simple Service
Discovery Protocol (SSDP) protocol to discover network services.
I'm trying to config this scenary:
Source -> XORP1(RP) -> XORP2 -> XORP3 -> XORP4 -> Member
Source(eth0): 192.168.2.10/24
Xorp1(eth0): 192.168.2.20/24
Xorp1(eth1): 192.168.3.10 (RP)
Xorp2(eth0): 192.168.3.20/24
Xorp2(eth1): 192.168.4.10
Xorp3(eth0): 192.168.4.20/24
Xorp3(eth1): 192.168.5.10/24
Xorp4(eth0): 192.168.5.20/24
Xorp4(eth1): 192.168.6.10/24
Member(eth0): 192.168.6.20/24
Routes
- Xorp1 has one static route to destination 4.0 and next-hop 3.20.
- Xorp2 has one static route to destination 5.0 and next-hop 4.20.
- Xorp3 has one static route to destination 6.0 and next-hop 5.20.
- Xorp4 has one static route to destination 6.0 and next-hop 6.20.
Xorp has enabled: igmpv3,pimsm4,mfea,fib2mrib and one static route in each
xorp.
Each xorp have in their config the static RP part (192.168.3.10).
do I need to be worried about the warning or the config is fine?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20100525/4ab0978d/attachment.html
More information about the Xorp-users
mailing list