[Xorp-users] OSPF6 not working

[Ben Greear]

On 11/30/2010 03:10 PM, Patricio Latini wrote:
> I am trying to configure ospf6 on an interface, however i so not see any
> hello going out.
>
> Has anybody got working ospf6 on v1.6?

I know it can work in xorp.ct, but I haven't tried it in v1.6.

I think you'll need a global and link-local IPv6 addr configured
for each interface.  You might look here for some example configs:

https://github.com/greearb/xorp.ct/tree/master/xorp/rtrmgr/config

ospf-mcast-router1.conf
ospf-mcast-router2.conf

Thanks,
Ben

>
> Thanks a lot
>
> Patricio
>
> This is the configuration
>
> ospf6 0 {
> router-id: 172.17.0.1
> area 1.0.0.1 {
> default-lsa {
> }
> interface vlan18 {
> vif vlan18 {
> address FC00:0000:0000:FF00::1 {
> }
> hello-interval: 1
> }
> }
> interface vlan19 {
> vif vlan19 {
> address FC00:0000:0000:FF01::1 {
> }
> }
> }
> }
> }
>
>
>
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com