[Xorp-users] OSPF6 not working

[Patricio Latini]

Ben, thanks a lot. Adding the link-local address to the interfaces made the difference.
 
Now it is working fine!
 
Patricio
 
> Date: Tue, 30 Nov 2010 15:17:47 -0800
> From: greearb at candelatech.com
> To: p_latini at hotmail.com
> CC: xorp-users at xorp.org
> Subject: Re: [Xorp-users] OSPF6 not working
> 
> On 11/30/2010 03:10 PM, Patricio Latini wrote:
> > I am trying to configure ospf6 on an interface, however i so not see any
> > hello going out.
> >
> > Has anybody got working ospf6 on v1.6?
> 
> I know it can work in xorp.ct, but I haven't tried it in v1.6.
> 
> I think you'll need a global and link-local IPv6 addr configured
> for each interface. You might look here for some example configs:
> 
> https://github.com/greearb/xorp.ct/tree/master/xorp/rtrmgr/config
> 
> ospf-mcast-router1.conf
> ospf-mcast-router2.conf
> 
> Thanks,
> Ben
> 
> >
> > Thanks a lot
> >
> > Patricio
> >
> > This is the configuration
> >
> > ospf6 0 {
> > router-id: 172.17.0.1
> > area 1.0.0.1 {
> > default-lsa {
> > }
> > interface vlan18 {
> > vif vlan18 {
> > address FC00:0000:0000:FF00::1 {
> > }
> > hello-interval: 1
> > }
> > }
> > interface vlan19 {
> > vif vlan19 {
> > address FC00:0000:0000:FF01::1 {
> > }
> > }
> > }
> > }
> > }
> >
> >
> >
> > _______________________________________________
> > Xorp-users mailing list
> > Xorp-users at xorp.org
> > http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
> 
> 
> -- 
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc http://www.candelatech.com
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20101130/37304a23/attachment.html