[Xorp-users] RIP Direction in XORP

[Ben Greear]

On 08/01/2011 04:00 PM, jobhunts02 at aol.com wrote:
> In configuring Netgear routers, there's an option called "RIP Direction," which can be:
>
> None - Router neither broadcasts its route table nor does it accept any RIP packets from outer routers.  Effectively disables RIP.
>
> Both - Router broadcasts its routing table and also processes RIP information received from other routers.
>
> Out Only - Router broadcasts its routing table periodically but does not accept RIP information from other routers.
>
> In Only - Router accepts RIP information from other routers, but does not broadcast its routing table.

You might could do this with policies if nothing else.

I assume you read through the pertinent user-guide section for RIP to see if there
was anything obvious?

Thanks,
Ben

>
>
> Can XORP be configured to mimic these four choices?
>
> _______________________________________________
> Xorp-users mailing list
> Xorp-users at xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com