[Xorp-users] warning messages generated when the daemon xorp_rtrmgr is run

Ben Greear greearb at candelatech.com
Thu Mar 17 19:09:23 PDT 2011


On 03/17/2011 07:00 PM, Murthy N Srinivas-B22237 wrote:
> Thnaks for your help. It looks odd to have can-bsr and can-rp entries in each m-router in the network.
> We tried this too but did not work.

It takes a minute or two on startup before the mcast traffic passes in my
tests, but after things normalize, it passes fine.

That is the configuration I use for our virtual router network,
and it will handle dropped network links and other disturbances
(using OSPF to re-build routing trees as needed).

As always with multicast, make sure your transmitter has
a big enough TTL to get through your network.

Thanks,
Ben

>
> -ns murthy
>
> -----Original Message-----
> From: Ben Greear [mailto:greearb at candelatech.com]
> Sent: Friday, March 18, 2011 4:09 AM
> To: Murthy N Srinivas-B22237
> Cc: Vunnava Kesava Srinivas-B32946; xorp-users at xorp.org
> Subject: Re: [Xorp-users] warning messages generated when the daemon xorp_rtrmgr is run
>
> I couldn't get your config files to work on x86.  Probably because you don't have cand-bsr and cand-rp entries in both config files?
>
> The attached files for a similar configuration do work for me, however.  I have the cand-bsr and cand-rp sections in each config file.
>
> Thanks,
> Ben
>
> --
> Ben Greear<greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
>


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com



More information about the Xorp-users mailing list