From greearb at candelatech.com  Thu Nov 13 12:25:11 2014
From: greearb at candelatech.com (Ben Greear)
Date: Thu, 13 Nov 2014 12:25:11 -0800
Subject: [Xorp-users] RIP protocol changes have been committed.
Message-ID: <546513A7.8040803@candelatech.com>

I had need to get RIP and RIPng working properly, and just pushed
a bunch of changes that fixes issues I saw in my setup.

So, if you are interested in using RIP, you might give it a try.

I also updated the RIP wiki page with a rip + ripng example
towards the bottom of this page:

http://xorp.run.montefiore.ulg.ac.be/latex2wiki/user_manual/rip_and_ripng

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


From wei.wen0 at gmail.com  Mon Nov 24 11:04:38 2014
From: wei.wen0 at gmail.com (Wei Wen)
Date: Mon, 24 Nov 2014 14:04:38 -0500
Subject: [Xorp-users] XORP installation and xorp_rtrmgr
Message-ID: <CALFosU4BLjT6SY9J9mw+59kusy-1gjJduHEsatidq=SgZ=VefA@mail.gmail.com>

Hello,

I am new to XORP. I installed it on my ubuntu machine. I followed the
installation steps and  think I installed it successfully. However, I don't
find a directory and file called "installdir/etc/xorp/xorp.config.  So I
tried to create a xorp.config file myself using the simplest example in
XORP's online getting started guide, and put it in the /usr/etc/ directory.
There was no such a directory before. Even after this, xorp_rtrmgr still
didn't work. It complained about a few things. But I don't know how to
fulfill these. The following is a list of the errors:

ERROR: Failed chown on path: /var/tmp/xrl.UNKsHs error: operation not
permitted
ERROR: Failed chown on path: /var/tmp/xrl.7ejB0F error: operation not
permitted
rtrmgr shutting down due to an init error: PARSE ERROR [config File
/usr/etc/xorp.config, line 1: No template found in template map; Last
symbol pased was "protocol"

I do not have the /var/tmp... directory and those files, and I don't know
why it was complaining about them. In addition, I did not have the /usr/etc
directory and xorp.config file. I added them. For the xorp.config file, I
copied the configuration from XORP's getting started document, and it is
the simplest one that I copied.

Could anyone please help me? Thank you very much.

Sincerely,

Wei Wen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20141124/6326f806/attachment.html