[Xorp-users] XORP from git hub not running .

[Ben Greear]

On 05/28/2015 04:21 AM, Pullabhatla Vinod wrote:
> Thanks Ben,
> I ran scons check and it worked for me also .
> Now I am able to run XORP .  Can you tell me if PIM-SM can run in non-root namespaces ? Is there any limitation ?

It requires root permission, but if you mean a different directory, that can probably
work.  Maybe the scons build cmd allows different prefix for install dir, or something like that.

I always use it installed in the default location.

Thanks,
Ben

>
> Thanks,
> Vinod.
>
> -----Original Message-----
> From: Ben Greear [mailto:greearb at candelatech.com]
> Sent: Thursday, May 28, 2015 1:06 AM
> To: Sarma P. Vinod-B46178
> Cc: xorp-users at xorp.org
> Subject: Re: [Xorp-users] XORP from git hub not running .
>
> We installed a clean 12.04 VM, installed the xorp dependencies, built, and tested it:
>
> sudo apt-get install git scons flex bison libssl-dev ncurses-dev g++
>
> mkdir ~/git
> cd ~/git
> #  Clone xorp github repository
>
> cd xorp.ct.git/xorp
> scons -j8
> sudo scons install
>
> # Created xorp user group
> # added 'root' to xorp user group:
>
> sudo addgroup xorp
> sudo adduser greearb xorp
> sudo adduser root xorp
>
> Then, as root:
>
> /usr/local/xorp/sbin/xorp_rtrmgr -c /home/greearb/xorp.ct/xorp/package_files/xorp.conf
>
> Then, in a different terminal:
>
> sudo /usr/local/xorp/sbin/xorpsh
>
> (It connected fine).
>
>
> So, it works for me.
>
> You don't need to run 'scons check' at all, though I would hope that it does work.
>
> Thanks,
> Ben
>
>
> On 05/27/2015 05:54 AM, Pullabhatla Vinod wrote:
>> I am using Ubuntu 12.04 , Kernel - 3.13 . X86_64 .
>> Do it have to run scons check each time afer scons install ? What if I am cross compiling ? I have seen several questions on similar error in this mailing list . But could not find an answer to this .
>>
>> Thanks,
>> Vinod.
>>
>> -----Original Message-----
>> From: Ben Greear [mailto:greearb at candelatech.com]
>> Sent: Wednesday, May 27, 2015 6:22 PM
>> To: Sarma P. Vinod-B46178; xorp-users at xorp.org
>> Subject: Re: [Xorp-users] XORP from git hub not running .
>>
>> What OS/version are you using?
>>
>> Thanks,
>> Ben
>>
>> On 05/27/2015 03:48 AM, Pullabhatla Vinod wrote:
>>> I tried to compile and run XORP for X86 and Powerpc 64 bit. While running it is giving me the following error :
>>>
>>> rtrmgr/main_rtrmgr.cc Init faie due to parse errors. PARSE ERROR [
>>> Template File : < path to a tp file > ] last read symbol was
>>> <something>
>>>
>>> This is coming for all the template files . What am I doing wrong . Please help me out .
>>>
>>> I have taken the source from : https://github.com/greearb/xorp.ct
>>>
>>> gcc version :  4.8.2
>>>
>>> Thanks,
>>>
>>> Vinod.
>>>
>>>
>>>
>>> _______________________________________________
>>> Xorp-users mailing list
>>> Xorp-users at xorp.org
>>> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
>>>
>>
>
>
> --
> Ben Greear <greearb at candelatech.com>
> Candela Technologies Inc  http://www.candelatech.com
>

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com