[Xorp-users] BGP peering configuration fail

[Ochakovski Eli]

Hello,
I have been trying to configure BGP Protocol:
When I configure Bgp protocol commit OK but the peering fail error 102 Command failed,
I have tried every thing, the same error without reason or details.
What am I missing?
Thanks,

My configuration:
Protocols {
        Bgp {
                Bgp-id: 150.42.1-.1-
                Local-as: "10"
               Peer "150.42.30.100" {
                       local-ip: "150.42.10.10"
                      as: "10"
                     next-hop: 150.42.10.10
             }
    }
   Interfaces {
          Interface service {
                 Vif service {
                         Address 150.42.10.10 {
                                   Prefix-length: 24
                         }
                }
        }
}

# commit
Commit Failed
102 Command failed

The information in this e-mail transmission contains proprietary and business 
sensitive information.  Unauthorized interception of this e-mail may constitute 
a violation of law. If you are not the intended recipient, you are hereby 
notified that any review, dissemination, distribution or duplication of this 
communication is strictly prohibited. You are also asked to contact the sender 
by reply email and immediately destroy all copies of the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/xorp-users/attachments/20151019/177ab02c/attachment.html