[Bro] Bro performance issues
Tomer Teller
djteller at gmail.com
Thu Nov 3 04:47:00 PDT 2011
Thanks for the tip William,
This trick doesn't work on Bro2.0
I tried both aux_scripts and creating the worker-1.local.bro file
I installed the new policy stop/start and again the workers are not
load-balancing traffic
tcpreplay -i ethX --mbps=1000.0 680000_packets.pcap
[BroControl] > netstats
worker-1: 1320349321.810072 recvd=*639496 *dropped=30101 link=669597
worker-2: 1320349322.010123 recvd=*639549 *dropped=30048 link=669597
This is Out of the box Bro2.0 with PF_RING and libpcap compiles with
PF_RING.
On Wed, Nov 2, 2011 at 9:41 PM, William Jones <jones at tacc.utexas.edu> wrote:
> Try the following pcap filtering trick:****
>
> ‘****
>
> [manager]****
>
> type=manager****
>
> host=localhost****
>
> ** **
>
> [proxy-1]****
>
> type=proxy****
>
> host=localhost****
>
> ** **
>
> [worker-1]****
>
> type=worker****
>
> host=localhost****
>
> interface=em0****
>
> aux_scripts=q1of2****
>
> ** **
>
> [worker-2]****
>
> type=worker****
>
> host=localhost****
>
> aux_scripts=q2of2****
>
> ** **
>
> Add the following scripts in <bro>share/bro/site****
>
> ** **
>
> q1of2.bro:****
>
> redef restrict_filters += { ["q0"] = "(ip[12:4] + ip[16:4]) & 1 == 0" };**
> **
>
> ** **
>
> q2of2.bro:****
>
> ** **
>
> redef restrict_filters += { ["q0"] = "(ip[12:4] + ip[16:4]) & 1 == 1" };**
> **
>
> ** **
>
> ** **
>
> ** **
>
> This will split input between the two bro workers.****
>
> ~****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> *From:* bro-bounces at bro-ids.org [mailto:bro-bounces at bro-ids.org] *On
> Behalf Of *Tomer Teller
> *Sent:* Wednesday, November 02, 2011 10:46 AM
> *To:* Seth Hall
> *Cc:* bro at bro-ids.org
> *Subject:* Re: [Bro] Bro performance issues****
>
> ** **
>
> This is my node.cfg config file:****
>
> ** **
>
> [manager]****
>
> type=manager****
>
> host=localhost****
>
> ** **
>
> [proxy-1]****
>
> type=proxy****
>
> host=localhost****
>
> ** **
>
> [worker-1]****
>
> type=worker****
>
> host=localhost****
>
> interface=em0****
>
> ** **
>
> [worker-2]****
>
> type=worker****
>
> host=localhost****
>
> interface=em0****
>
> ** **
>
> I am running on Bro 2.0 Beta.****
>
> ** **
>
> I am replying a 680000 packets pcap file to the machine.****
>
> ** **
>
> When running broctl's netstats, this is what i see:****
>
> ** **
>
> worker-1: 1320276618.514073 recvd=669576 dropped=0 link=669576****
>
> worker-2: 1320276618.714115 recvd=669576 dropped=0 link=669576****
>
> ** **
>
> I expect to see load-balance between worker-1 and worker-2 but they are
> getting the same traffic. ****
>
> ** **
>
> I decided to patch Bro in order to "support" that load-balancing.****
>
> ** **
>
> I edited PktSrc::Process() (PktSrc.cc) and added my own code to
> distinguish between processes (i.e. worker-1, worker-2).****
>
> ** **
>
> Then looked at the data variable, extracted the ip src & dst and checked
> for -> (ipSRC ^ ipDST) % 2 == 0****
>
> ** **
>
> Worker-1 gets all the Even Result, Worker-2 gets all the Odd Results****
>
> ** **
>
> Also had to play around with (++stats.received) to reflect the new changes.
> ****
>
> ** **
>
> This small patch dramatically improved my performance.****
>
> ** **
>
> ** **
>
> ** **
>
> On Tue, Nov 1, 2011 at 4:08 PM, Seth Hall <seth at icir.org> wrote:****
>
>
> On Nov 1, 2011, at 4:26 AM, Tomer Teller wrote:
>
> > I configured the node.cfg and added:
> > 1 manager
> > 1 proxy
> > 2 workers - sniffing the same interface****
>
> Could you send the content of your node.cfg file? I noticed in your
> broctl session you sent, there was a reference to worker-3 which isn't
> represented in your description.
>
> Thanks,****
>
> .Seth
>
> --
> Seth Hall
> International Computer Science Institute
> (Bro) because everyone has a network
> http://www.bro-ids.org/****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.ICSI.Berkeley.EDU/pipermail/bro/attachments/20111103/340385e2/attachment.html
More information about the Bro
mailing list