[Xorp-hackers] FW: boot.config problems?

[Atanu Ghosh]

Hi,

To clarify the Powerbook G4 is running Mac OS X 10.4.2 not Linux.

   Atanu.

>>>>> "Atanu" == Atanu Ghosh <atanu@ICSI.Berkeley.EDU> writes:

    Atanu> Hi, We have tested XORP on Linux 2.4 and 2.6 kernels and it
    Atanu> seem to work on a Powerbook G4. We haven't tried your
    Atanu> particular combination.

    Atanu> Its very odd that the router manager doen't print
    Atanu> anything. Even without the "-v" flag it should print
    Atanu> something.

    Atanu>     Atanu.

>>>>> "Weaver" == Weaver John <John.Weaver@motorola.com> writes:

    Weaver> Just tried the non-stripped version and I get the same
    Weaver> thing.  I launched it with the -v and still get nothing to
    Weaver> print.  Has any one ever tried this on the PPC?  I am using
    Weaver> gcc 3.3.3, autoconf 2.59, and automake 1.8.3.

    Weaver> John

    Weaver> -----Original Message----- From: Kristian Larsson
    Weaver> [mailto:kristian@juniks.net] Sent: Wednesday, September 14,
    Weaver> 2005 12:35 AM To: Weaver John-JWEAVER1 Cc:
    Weaver> xorp-hackers@xorp.org Subject: Re: [Xorp-hackers] FW:
    Weaver> boot.config problems?

    Weaver> Hmm, it's possible I suppose, but I've had no such problems
    Weaver> so far...

    Weaver> Have you tried with a non-stripped version?

    Weaver> I think you can tell strip to be more careful when removing
    Weaver> stuff, but then the binaries won't shrink as much...

    Weaver> //Kristian

    Weaver> On Tue, Sep 13, 2005 at 04:55:10PM -0500, Weaver
    Weaver> John-JWEAVER1 wrote:
    >>> I wonder if stripping the whole structure has hosed it?
    >>> 
    >>> -----Original Message----- From: Kristian Larsson
    >>> [mailto:kristian@juniks.net] Sent: Tuesday, September 13, 2005
    >>> 4:29 PM To: Weaver John-JWEAVER1 Subject: Re: [Xorp-hackers] FW:
    >>> boot.config problems?
    >>> 
    >>> I'm not in front of a xorp router right now so I can't test the
    >>> config but since Atanu did that I'm sure it's okey.
    >>> 
    >>> xorp_rtrmgr -v -b <config> should work
    >>> 
    >>> But you're saying it's just hanging!? When does this happen?
    >>> When using -v in conjuction with this configuration file? Just
    >>> using -v? As long as you are using this config.boot?
    >>> 
    >>> If it's just when using the particular config you should try
    >>> loading parts of it.
    >>> 
    >>> Kristian
    >>> 
    >>> On Tue, Sep 13, 2005 at 04:10:56PM -0500, Weaver John-JWEAVER1
    >>> wrote: > Someone else changed the name of it and moved it.  I am
    >>> pretty sure > it was modified from the original config.boot.  I
    >>> ripped out all the > irrelevant stuff for simplicity.  I used
    >>> the -b command to specify > this file so hopefully it was
    >>> picking this one up?  When I boot with > the -v, can I use -vb
    >>> or -v -b?
    >>> > 
    >>> > John
    >>> > 
    >>> > -----Original Message----- > From: Kristian Larsson
    >>> [mailto:kristian@juniks.net] > Sent: Tuesday, September 13, 2005
    >>> 4:07 PM > To: Weaver John-JWEAVER1 > Cc: xorp-hackers@xorp.org >
    >>> Subject: Re: [Xorp-hackers] FW: boot.config problems?
    >>> > 
    >>> > You're config file is not named boot.config but rather
    >>> config.boot > and placed in /usr/local/xorp/config.boot, right?
    >>> > 
    >>> > Try starting up with -v, you should get some error message.
    >>> > 
    >>> > Have you actually used this configuration or is it written by
    >>> hand?  > It doesn't contain a xorp header which makes me
    >>> wonder...  > You could start xorp and then add little chunks of
    >>> the config and > the commiting to make sure the whole conf is
    >>> alright.
    >>> > 
    >>> > Regards, > Kristian
    >>> > 
    >>> > On Tue, Sep 13, 2005 at 03:46:55PM -0500, Weaver John-JWEAVER1
    >>> wrote: > > I am having problems getting XORP starting up.  I
    >>> think it may be > > my boot.config?  I have 2 interfaces (eth1
    >>> and eth2) and am only > > running PIM and IGMP on those
    >>> interfaces.  I am trying to use the > > default system > config.
    >>> > > Is there any debug I can turn on when I try and launch the
    >>> xorp_rtmgr?

    >>> > > Can anyone take a look at this file and let me know if I
    >>> messed it up?

    >>> > > The system I am running it on is kind of like a Power Mac.
    >>> It is > > running Yellow Dog on a PPC 750.  Everything built
    >>> fine and the > > make test passed except for rip as you may
    >>> remember.
    >>> > >  
    >>> > > Thanks, > > John
    >>> > 
    Weaver> _______________________________________________ Xorp-hackers
    Weaver> mailing list Xorp-hackers@icir.org
    Weaver> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
    Atanu> _______________________________________________ Xorp-hackers
    Atanu> mailing list Xorp-hackers@icir.org
    Atanu> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers