[Xorp-users] a newbie's question about xorp

[Pavlin Radoslavov]

Dondon,

> Sorry but I forgot to put the extra '*/' in my mail. However, I checked 
> the config in my UDLR and there is the */ to close the comment. I'm 
> still wondering what possibly could go worng here? I still receive the 
> same error message.

Please verify that you have */ in both places where you have
/*traceoptions

Also, note that you cannot have nested comments, hence please verify
that too.

Regards,
Pavlin

> 
> Dondon
> 
> Atanu Ghosh wrote:
> 
> >Hi,
> >
> >I notice that in your config you open a comment "/*traceoptions {",
> >which does not seem to get closed.
> >
> >      Atanu.
> >
> >  
> >
> >>>>>>"Dondon" == Dondon Carlos <dondonc@asti.dost.gov.ph> writes:
> >>>>>>            
> >>>>>>
> >
> >    Dondon> Good morning, guys!
> >
> >    Dondon> I am installing the xorp for my Unidirectional Link router. I loaded
> >    Dondon> the Free-BSD 4.10 in the box and I installed xorp. THe lan card I'm
> >    Dondon> using has 4 interfaces and FreeBSD recognizes them as ste0, ste1,ste2
> >    Dondon> and ste3. THe ste0 interface points to the satellite link and the ste1
> >    Dondon> points to the LAN part of the network. I followed the instructions
> >    Dondon> handed in to me. It includes installing net-snmp and gmake. I also
> >    Dondon> created the xorp group using the command
> >    Dondon> pw groupadd xorp -g 12000
> >    Dondon> I configured and installed the xorp then I made the config.boot.
> >    Dondon> Here is the exact copy of the config.boot:
> >    Dondon> interfaces {
> >    Dondon> interface ste0 {
> >    Dondon> description: "upstream interface"
> >    Dondon> enabled: true
> >    Dondon> default-system-config
> >    Dondon> }
> >    Dondon> interface ste1 {
> >    Dondon> description: "downstream interface"
> >    Dondon> enabled: true
> >    Dondon> default-system-config
> >    Dondon> }
> >    Dondon> }
> >    Dondon> plumbing {
> >    Dondon> mfea4 {
> >    Dondon> enabled: true
> >    Dondon> interface ste0 {
> >    Dondon> vif ste0 {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> interface ste1 {
> >    Dondon> vif ste1 {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> interface register_vif {
> >    Dondon> vif register_vif {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> /*traceoptions {
> >    Dondon> flag all {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> } */
> >    Dondon> }
> >    Dondon> }
> >    Dondon> protocols {
> >    Dondon> igmp {
> >    Dondon> enabled: true
> >    Dondon> interface ste0 {
> >    Dondon> vif ste0 {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> interface ste1 {
> >    Dondon> vif ste1 {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> /*traceoptions {
> >    Dondon> flag all {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> }
> >    Dondon> }
> >    Dondon> protocols {
> >    Dondon> pimsm4 {
> >    Dondon> enabled: true
> >    Dondon> interface ste0 {
> >    Dondon> vif ste0 {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> interface ste1 {
> >    Dondon> vif ste1 {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> interface register_vif {
> >    Dondon> vif register_vif {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >    Dondon> switch-to-spt-threshold {
> >    Dondon> enabled: true
> >    Dondon> interval-sec: 100
> >    Dondon> bytes: 102400
> >    Dondon> }
> >    Dondon> }
> >    Dondon> }
> >    Dondon> protocols {
> >    Dondon> fib2mrib {
> >    Dondon> enabled: true
> >    Dondon> }
> >    Dondon> }
> >
> >    Dondon> After this I typed the command:
> >    Dondon> /usr/local/xorp/bin/xorp_rtrmgr &
> >
> >    Dondon> and I received the error message,
> >
> >    Dondon> [.... ERROR xorp_rtrmgr:6354 RTRMGR +311 main_rtrmgr.cc run] rtrmgr
> >    Dondon> shutting down due to init error: PARSE ERROR [Config File
> >    Dondon> /usr/local/xorp/config.boot, line 2] No template found in template
> >    Dondon> map; last symbol parsed was "ste0"
> >
> >    Dondon> Can anyone help me here? Thank you very much in advance.
> >
> >    Dondon> CHeers,
> >    Dondon> Dondon
> >
> >
> >    Dondon> _______________________________________________
> >    Dondon> Xorp-users mailing list
> >    Dondon> Xorp-users@xorp.org
> >    Dondon> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users
> >
> >  
> >
> _______________________________________________
> Xorp-users mailing list
> Xorp-users@xorp.org
> http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-users